SOLAS YJ-CD-14/17 Concord Impeller

SOLAS, the technology leader in the impeller design, creates lots of outstanding advantages built into its products. All SOLAS impellers are made of an ultra high strength, corrosion resistant stainless steel, and are cast in a one-piece mold without bending the edges of the blades to achieve the perfect pitch.

The SOLAS YJ-CD-14/17 Concord Impeller is designed with SOLAS impeller technology for applications where acceleration, top speed, and operating conditions must be balanced through pitch selection. SOLAS impellers are made from high-strength, corrosion-resistant stainless steel and cast in a one-piece mold. This manufacturing method avoids bending the blade edges and is intended to help achieve the specified pitch.

The 14/17 pitch configuration provides a balance of performance characteristics based on the selected pitch. Smaller pitches can improve acceleration while reducing top speed, whereas increasing pitch can reduce acceleration and increase top speed. A higher-than-stock pitch may be used for watercraft with more horsepower than stock, while a lower-than-stock pitch may be appropriate for certain applications involving increased rev limits, high altitude, high temperatures, or additional carried weight.

Limited and modified impeller recommendations may be used in either application depending on the desired RPM and speed. The SOLAS YJ-CD-14/17 Concord Impeller is identified by part number YJ-CD-14/17 and is built with corrosion-resistant stainless steel construction for marine use.

Features:

• Brand and Part Number: SOLAS YJ-CD-14/17 Concord impeller
• Construction: Made from high-strength, corrosion-resistant stainless steel
• Manufacturing: Cast in a one-piece mold without bending the blade edges
• Pitch Performance: Smaller pitches can improve acceleration and reduce top speed
• Pitch Performance: Increasing pitch can decrease acceleration and increase top speed
• Higher-Pitch Application: A higher pitch than stock can be used for watercraft with more horsepower than stock
• Lower-Pitch Applications: A lower pitch than stock can be used for applicable re-flashed ECU, high-altitude, or high-temperature applications
• Load Consideration: Reduced pitch can be used for higher weight to be carried to limit the volume of water through the pump
• Tuning Flexibility: Limited and modified impeller recommendations can be used depending on desired RPM and speed