EBC DRCF241 Carbon Fiber Clutch Complete Set

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC DRCF241 Carbon Fiber Clutch Complete Set is designed as a pre-measured assembly to help reset your motorcycle to its exact stock stack height. Replacing plates alone may not restore the correct specification or prevent clutch slippage, so this complete set combines matched components for a consistent installation.

The kit includes a heavy-duty clutch liner impregnated with carbon fibers. Compared with cork-based clutch plates, the carbon fiber liner is designed to provide improved wear characteristics, grip and clutch feel. The included springs are 15% tougher than stock, which may increase lever pressure while providing additional clutch control and resistance to slippage. EBC states that heavy-duty springs should be used because stock springs can become heat fatigued after hard use.

This complete set includes a full set of friction plates precision measured as an assembly for the motorcycle, a full set of pin-planished steel plates intended to improve lubricant distribution, and shot-peened, heat-treated and tempered carbon steel clutch springs. The kit fits select KTM 65 SXS and KTM 65 SX applications from the model years listed below.

Fitment includes the 2012–2015 KTM 65 SXS and the 2009–2014 KTM 65 SX.

Features:

• Complete clutch set with friction plates, steel plates and clutch springs
• Friction plates are precision measured as an assembly for the motorcycle
• Heavy-duty clutch liner is impregnated with carbon fibers
• Springs are 15% tougher than stock
• Steel plates are pin planished for better lubricant distribution
• Springs are shot peened, heat treated and tempered carbon steel
• Fits 2012–2015 KTM 65 SXS
• Fits 2009–2014 KTM 65 SX

Fitment:
KTM 65 SX 2009
KTM 65 SX 2010
KTM 65 SX 2011
KTM 65 SX 2012
KTM 65 SX 2013
KTM 65 SX 2014
KTM 65 SX 2015
KTM 65 SX 2016
KTM 65 SXS 2012
KTM 65 SXS 2013
KTM 65 SXS 2014
KTM 65 SXS 2015
KTM 65 XC 2009