EBC DRCF230 Carbon Fiber Clutch Complete Set

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC DRCF230 Carbon Fiber Clutch Complete Set is designed to help restore your motorcycle’s clutch assembly to the correct stock stack height when installed as a complete, pre-measured assembly. The kit includes precision-measured friction plates, pin-planished steel plates, and heavy-duty clutch springs for improved clutch feel, control, and resistance to slippage.

The friction plates use a heavy-duty clutch liner impregnated with carbon fibers, which is designed to provide improved wear performance and grip compared with the cork-based plates used in earlier DRC kits. The included springs are 15% tougher than stock, adding lever pressure while supporting consistent clutch engagement and drive. The steel plates are pin planished to promote better lubricant distribution.

This EBC clutch set fits the 2000–2003 Yamaha TT-R125, 2003–2008 Yamaha TT-R125E, and 2004–2005 Yamaha TT-R125E models listed in the product data. The complete assembly is intended for riders seeking a coordinated clutch replacement rather than installing friction plates alone.

Brand: EBC
SKU: 15-19230F
Part Number: DRCF230

Features:

• Complete pre-measured friction plate assembly designed to help restore the stock clutch stack height
• Carbon fiber-impregnated heavy-duty clutch liner for improved wear performance and grip
• Full set of pin-planished steel plates to support better lubricant distribution
• Shot-peened, heat-treated, and tempered carbon steel clutch springs
• Clutch springs are 15% tougher than stock springs
• Fits listed Yamaha TT-R125 and TT-R125E applications from 2000 through 2008
• Brand: EBC; SKU: 15-19230F; Part Number: DRCF230

Fitment:
Yamaha TT-R125 2000
Yamaha TT-R125 2001
Yamaha TT-R125 2002
Yamaha TT-R125 2003
Yamaha TT-R125E 2003
Yamaha TT-R125E 2004
Yamaha TT-R125E 2005
Yamaha TT-R125E 2006
Yamaha TT-R125E 2007
Yamaha TT-R125E 2008
Yamaha TT-R125E 2009
Yamaha TT-R125L 2000
Yamaha TT-R125L 2001
Yamaha TT-R125L 2002
Yamaha TT-R125L 2003
Yamaha TT-R125L 2004
Yamaha TT-R125L 2005
Yamaha TT-R125L 2006
Yamaha TT-R125L 2007
Yamaha TT-R125L 2008
Yamaha TT-R125LE 2003
Yamaha TT-R125LE 2004
Yamaha TT-R125LE 2005
Yamaha TT-R125LE 2006
Yamaha TT-R125LE 2007
Yamaha TT-R125LE 2008
Yamaha TT-R125LE 2009
Yamaha TT-R125LE 2011
Yamaha TT-R125LE 2012
Yamaha TT-R125LE 2013
Yamaha TT-R125LE 2014
Yamaha TT-R125LE 2015