EBC DRCF111 Carbon Fiber Clutch Complete Set

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC DRCF111 Carbon Fiber Clutch Complete Set is designed as a pre-measured assembly to help reset your bike to its exact stock stack height. Replacing clutch plates alone may not return the clutch to specification, while this complete set is measured for the application to help support proper setup and reduce the potential for slippage.

The kit includes a heavy-duty clutch liner impregnated with carbon fibers. Compared with cork-based clutch plates, the carbon fiber material is designed to wear better, provide stronger grip and deliver improved clutch feel. The included springs are 15% tougher than stock, which may increase lever pressure while providing additional clutch control and durability.

This EBC DRCF111 kit includes a full set of friction plates precision measured as an assembly, a full set of pin-planished steel plates for improved lubricant distribution, and shot-peened, heat-treated and tempered carbon steel clutch springs. It fits 2002–2011 Yamaha YZ85 models.

Brand: EBC
Part Number/SKU: DRCF111

Features:

• Full set of carbon fiber-impregnated friction plates precision measured as an assembly
• Full set of pin-planished steel plates for improved lubricant distribution
• Shot-peened, heat-treated and tempered carbon steel clutch springs
• Springs are 15% tougher than stock
• Fits 2002–2011 Yamaha YZ85 models

Fitment:
Yamaha YZ85 2002
Yamaha YZ85 2003
Yamaha YZ85 2004
Yamaha YZ85 2005
Yamaha YZ85 2006
Yamaha YZ85 2007
Yamaha YZ85 2008
Yamaha YZ85 2009
Yamaha YZ85 2010
Yamaha YZ85 2011
Yamaha YZ85 2012
Yamaha YZ85 2013
Yamaha YZ85 2014
Yamaha YZ85 2015
Yamaha YZ85 2016