EBC DRCF108 Carbon Fiber Clutch Complete Set

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC DRCF108 Carbon Fiber Clutch Complete Set is designed as a pre-measured assembly to help restore your bike to its exact stock stack height. Replacing plates alone may not return the clutch to specification, while the complete assembly helps address stack height and potential slippage concerns.

This kit features springs that are 15% tougher than stock, providing increased clutch lever pressure along with enhanced feel and control. The heavy-duty clutch liner is impregnated with carbon fibers for improved wear characteristics, grip, and clutch feel compared with the cork-based plates used in earlier DRC kits.

The EBC DRCF108 set includes a full set of precision-measured friction plates, pin-planished steel plates designed for better lubrication distribution, and shot-peened, heat-treated, tempered carbon steel clutch springs. It fits 1992–2001 KTM 250 SX models. SKU: 15-1908F.

Features:

• Carbon fiber clutch liner: Heavy-duty liner impregnated with carbon fibers for improved wear characteristics, grip, and clutch feel.
• Pre-measured friction plates: Full set precision measured as an assembly for the bike.
• Pin-planished steel plates: Full set designed for better lubrication distribution.
• Heavy-duty clutch springs: Shot-peened, heat-treated, and tempered carbon steel springs that are 15% tougher than stock.
• Vehicle fitment: Fits 1992–2001 KTM 250 SX models.
• Brand and SKU: EBC DRCF108; SKU 15-1908F.

Fitment:
KTM 250 SX 1992
KTM 250 SX 1993
KTM 250 SX 1994
KTM 250 SX 1995
KTM 250 SX 1996
KTM 250 SX 1997
KTM 250 SX 1998
KTM 250 SX 1999
KTM 250 SX 2000
KTM 250 SX 2001
KTM 250 SX 2002
KTM 250 SX 2003
KTM 250 XC 2006
KTM 250 XC 2007
KTM 250 XC 2008
KTM 250 XC 2009
KTM 250 XC 2010
KTM 250 XC-W 2006
KTM 250 XC-W 2007
KTM 250 XC-W 2008
KTM 250 XC-W 2009
KTM 250 XC-W 2010
KTM 300 SX 1992
KTM 300 SX 1993
KTM 300 SX 1994
KTM 300 SX 1995
KTM 300 SX 1996
KTM 300 XC 2006
KTM 300 XC 2007
KTM 300 XC 2008
KTM 300 XC 2009
KTM 300 XC 2010
KTM 300 XC-W 2006
KTM 300 XC-W 2007
KTM 300 XC-W 2008
KTM 300 XC-W 2009
KTM 300 XC-W 2010
KTM 380 Sx 1998
KTM 380 Sx 1999
KTM 380 Sx 2000
KTM 380 Sx 2001
KTM 380 Sx 2002