SOLAS Concord Impeller 159mm SRX-CD-15/21

SOLAS, the technology leader in the impeller design, creates lots of outstanding advantages built into its products. All SOLAS impellers are made of an ultra high strength, corrosion resistant stainless steel, and are cast in a one-piece mold without bending the edges of the blades to achieve the perfect pitch.

The SOLAS Concord Impeller 159mm, part number SRX-CD-15/21, is designed using SOLAS impeller technology to support performance-focused watercraft applications. The impeller is made from ultra high-strength, corrosion-resistant stainless steel and cast in a one-piece mold. This construction helps maintain consistent blade geometry without bending the blade edges to achieve the intended pitch.

Impeller pitch influences acceleration and top speed. A smaller pitch can improve acceleration while reducing top speed, while an increased pitch can reduce acceleration and increase top speed. A higher-than-stock pitch may be used for watercraft with more horsepower than stock.

SOLAS recommendations for limited and modified impellers can be applied according to the desired RPM and speed. A lower-than-stock pitch may be used with a watercraft featuring a re-flashed ECU that raises the rev limiter, or in high-altitude and high-temperature conditions where horsepower is reduced, when applicable. Reduced pitch can also support applications carrying additional weight by limiting the volume of water moving through the pump.

Brand: SOLAS. Part number: SRX-CD-15/21. Model: Concord Impeller 159mm.

Features:

• Construction: Made from ultra high-strength, corrosion-resistant stainless steel.
• Molded Design: Cast in a one-piece mold without bending the blade edges.
• Pitch Selection: Smaller pitches improve acceleration and reduce top speed.
• Top Speed: Increasing pitch decreases acceleration and increases top speed.
• Higher Pitch Application: A higher-than-stock pitch can be used for watercraft with more horsepower than stock.
• Modified Applications: Limited and modified impeller recommendations can be used according to desired RPM and speed.
• Lower Pitch Application: A lower-than-stock pitch can be used for applicable re-flashed ECU, high-altitude, or high-temperature applications.
• Load Support: Reduced pitch can help accommodate higher weight by limiting the volume of water through the pump.