{"product_id":"bagger-nation-super-riser-clamp-src-1-00-for-1-inch-handlebars","title":"Bagger Nation Super Riser Clamp SRC-1.00 for 1-Inch Handlebars","description":"The Bagger Nation Super Riser Clamp is a must when installing internally wired custom handlebars. Our incredibly strong design is CNC machined from a solid block of 6061-T6 aircraft aluminum. The innovative design incorporates a series of three locking screws that virtually lock the ever popular tall Monkey Bars in place. The Super Riser Clamp all but eliminates the potential for handlebar slippage that is common with tall bars and big riders. Simply put, a 10” or higher bar and a 200+ lb. rider creates an increased leverage that was never considered by factory engineers! Especially when you’re suddenly pulling yourself up off your seat in an “emergency unseen pot hole, trying not to bust your butt” situation…riders know exactly what we mean! Additionally, 2007-Earlier HD Touring models have a 2-piece top clamp system that can create a safety problem when handlebars are used with internal wiring. A large wiring exit hole is required on handlebars designed for internal wiring. This design factor can create a stress riser or breakage point where the handlebar is weakest at a point where the leverage is greatest at the same time. Without the use of our Super Riser Clamp you have created a recipe for potential disaster! The one piece, solid carved from billet design of our clamp completely eliminates this stress area and makes the wire exit of the handlebar the strongest not the weakest point! Last but not least, The Bagger Nation Super Riser Clamp and its 1-piece design with bar-locking set screws machined into the clamp will prevent inferior handlebars with poor knurling from slipping. Our Super Riser Clamp has a wire relief incorporated into its design specifically for internal wiring applications. The 1-piece design displaces pressure off of the center of the handlebar making the handlebar stronger and more secure. This becomes especially important when using 1” handlebar styles and internal wiring.\n\u003cp\u003eThe Bagger Nation Super Riser Clamp SRC-1.00 is designed for custom handlebars with internal wiring and 1-inch handlebar styles. CNC machined in-house from a solid block of 6061-T6 aircraft aluminum, its one-piece construction helps provide a stronger, more secure handlebar clamping setup.\u003c\/p\u003e\u003cp\u003eThe clamp incorporates three locking screws that help secure tall Monkey Bars and reduce the potential for handlebar slippage associated with increased leverage. Its one-piece billet design displaces pressure away from the center of the handlebar and incorporates a wire relief for internal wiring applications. This design also helps address stress around the wiring exit area of internally wired handlebars.\u003c\/p\u003e\u003cp\u003eBagger Nation strongly recommends installing the Super Riser Clamp on 2007-earlier HD Touring models when installing Monkey Bars. The clamp is also designed to help prevent handlebars with poor knurling from slipping. Refer to the manufacturer’s installation and warranty guidance before use.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: CNC machined in-house from 6061-T6 aircraft aluminum.\u003c\/li\u003e\n\u003cli\u003eDesign: One-piece solid billet riser clamp construction.\u003c\/li\u003e\n\u003cli\u003eHandlebar compatibility: Designed for 1-inch handlebars.\u003c\/li\u003e\n\u003cli\u003eLocking system: Three locking screws help secure the handlebar in the clamp.\u003c\/li\u003e\n\u003cli\u003eInternal wiring support: Includes a wire relief designed for internal wiring applications.\u003c\/li\u003e\n\u003cli\u003eHandlebar security: One-piece construction helps reduce the potential for handlebar slippage and displaces pressure away from the center of the handlebar.\u003c\/li\u003e\n\u003cli\u003eRecommended application: Bagger Nation strongly recommends this clamp for 2007-earlier HD Touring models when installing Monkey Bars.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAGGERNATION","offers":[{"title":"Default Title","offer_id":44627136151639,"sku":"827-05370","price":202.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/5c18-5bfc144436f06.jpg?v=1794135068","url":"https:\/\/valleyspeed.net\/products\/bagger-nation-super-riser-clamp-src-1-00-for-1-inch-handlebars","provider":"The Speed Shop Canada","version":"1.0","type":"link"}