SLP

The SLP Drive Clutch Taper Holder, part number 20-220 and SKU 110-20220, holds the clutch securely on the taper during servicing. It is designed to support work involving the spider, center bearing, or belt-to-sheave clearance adjustment.Use this holder to help keep the drive clutch...

The SLP Drive Spring Blue/Silver is identified by part number 40-69 and SKU 44-0011. Designed as a drive spring, it provides a replacement component for applications that use this SLP part.This spring features a blue and silver finish and is supplied under the SLP...

The SLP Drive Spring Blue/Yellow is identified by part number 40-70 and SKU 44-0012. It is designed for applications requiring a drive spring with a blue and yellow finish.This product is branded by SLP and is provided as a standalone drive spring. Refer to...

The SLP Drive Spring Green/Silver, part number 40-72 and SKU 44-0016, is a replacement drive spring designed for use in applicable drive-system applications. Its green and silver finish provides straightforward visual identification when selecting or servicing components.This spring measures approximately 5.33 inches in length,...

The SLP Drive Spring Green/Yellow 40-73 is a replacement drive spring identified by SKU 44-0017. Its green and yellow color combination provides a clear visual identifier for the part.Designed for use as a drive spring, this SLP component is listed with a weight of...

The SLP Drive Spring Orange/Silver, part number 40-74, is a replacement drive spring identified by its orange and silver finish. Designed for use as a drive-system component, this spring provides a direct product reference for maintenance, repair, or replacement needs.Use the part number 40-74...

The SLP Ea/Flow Rite 2 1/2" Grommet is designed to help eliminate air restriction when installed in the dash for increased air box feed. It is a practical component for modified ATVs and supports improved airflow through the air intake system.This grommet is supplied...

The SLP Ea/Flow Rite 2-inch Grommet Mount is designed to help eliminate air restriction and increase air box feed when installed in the dash. It is intended for modified ATVs and provides a practical way to support improved airflow through the air box system.This...

The SLP Ea/Needle Shim .020 in helps raise the needle slightly to split the difference between E-Clip positions. It is designed for OEM, flat-slide, and rack-style snowmobile carburetors.This shim is specifically required when installing an SLP single pipe on Ski-Doo Rev-XP models with 800R...

The SLP Ea/Ski Saddle A/C Blk is identified by part number 35-300 and SKU 15-6500. This product is presented in a black finish and is designed as an Ea/Ski Saddle A/C component.Its listed product weight is 23.36 pounds. The SLP brand and product identifiers...

The SLP Ea/Ski Saddle V Max Blk is designed for select Yamaha snowmobile applications. This product is identified by SKU 15-6545 and is associated with SLP part number 35-321.Fitment includes the 2006, 2008, 2010, 2011, and 2012 Yamaha Apex; 2005, 2008, and 2011 Yamaha...

The SLP Exhaust Flange Gasket, SKU 12-5493, is designed for use as an exhaust flange sealing component. This gasket is identified by part number 090-996 and provides a dedicated replacement option for applications requiring the specified SLP exhaust flange gasket.Manufactured by SLP, this exhaust...

The SLP Exhaust Flange Gasket, SKU 27-5497 and part number 090-868, is designed for use in select Ski-Doo snowmobile applications. This gasket supports the exhaust flange connection and is suited to the listed models and model years.Compatible applications include the 2016 Ski-Doo Expedition Xtreme...

The SLP Exhaust Flange Graphoil Seal 2 1/4 in is designed for exhaust flange sealing applications. This seal is identified by part number 090-980 and SKU 27-0780.Its graphoil construction provides a dedicated sealing component for compatible 2 1/4-inch exhaust flange assemblies. Verify application requirements...

The SLP Exhaust Gasket S D, part number 090-869 and SKU 12-54951, is identified as an exhaust gasket for applications requiring this specific SLP part. Its straightforward design supports use as a replacement gasket where the specified part number is required.Verify the part number...

Polaris exhaust valves open with cylinder pressure. As you go up in elevation, cylinder pressures are reduced causing exhaust valves to open later than they should or in some cases not at all. This can cause poor and inconsistent top end horsepower. Changing to...

The SLP Flywheel Puller Polaris, part number 20-142 and SKU 12-1028, is designed for flywheel removal applications. It comes with six 6mm short bolts, six 6mm long bolts, and three 8mm bolts. The included bolts are high-quality grade 10.9 fasteners.Features: Bolt Set: Includes six...

This kit delivers a substantial increase in airflow to the intake of the Polaris RZR 900 XP. The additional airflow provides better throttle response, quicker acceleration and better top-end power. It is highly recommended that this kit be run in conjunction with an SLP...

Let it breathe! This intake grate replaces the stock intake grate and foam on the Polaris RZR 570. It utilizes our pre-filter material that repels water and helps keep dirt out of the air filter and clutch area to maintain optimum performance. Improve airflow...

These pre-filter vent kits help eliminate dirt and other heavy particles from getting into the intake for prolonged air filter life and into the clutches for longer clutch life. It replaces the stock foam and vent cover and provides more intake surface area. Utilizes...

This high flow air horn kit provides more airflow to the engine, which improves throttle response, peak horsepower and running consistency. A good improvement for stock sleds, and mandatory for modified ones. The SLP Intake Kit S/D Rev XP, part number 14-129 and SKU...

The SLP Keel Blade Lr, part number 35-169 and SKU 15-6846, is supplied as a pair. It is designed for applications requiring keel blade components from SLP.Each purchase includes two keel blades, providing a paired replacement or installation set. Refer to the applicable product...