{"title":"Rigid","description":null,"products":[{"product_id":"v-twin-51-0096-replica-retro-straight-leg-rigid-30-rake-frame","title":"V-Twin 51-0096 Replica Retro Straight Leg Rigid 30 Rake Frame","description":"Replica retro rigid straight leg frame features original styling and is updated to accept flat side tanks. Original type forged parts include: neck  side  front motor mount  rear motor mount  car mounts  and rear axle area.\n\u003cp\u003eThe V-Twin 51-0096 Replica Retro Straight Leg Rigid 30 Rake Frame includes a seat post, a transmission mount plate for a 4-speed transmission, and a rear axle. The frame accepts Panhead, Shovelhead, Evolution, and Twin Cam engines when used with a tin inner primary. It also accepts 1986–1999 FXST gas tanks and chain final drive.\u003c\/p\u003e\u003cp\u003eDesigned with a 2-inch raised neck and 9-1\/8 inches between the axle plates, the frame is taller in the engine compartment to accommodate Evolution and Twin Cam motors. It is compatible with rigid-mount 5- and 6-speed transmissions using aluminum inner and outer primaries; the transmission plate height should be checked for proper primary alignment. The frame accepts a 140mm rear tire and Softail-type transmissions.\u003c\/p\u003e\u003cp\u003eThe V-Twin 51-0096 frame is supplied with a brake cross shaft for mechanical brakes and a stock rear axle plate for use with a star hub wheel and mechanical brakes. The frame may require modification to the motor mount holes for proper alignment and clearance at the front rocker box area. V-Twin recommends pre-assembly with the inner primary, transmission, and rear mount adapter when using TC-88 type motors. The seat post tube may require shortening and further reaming for proper fit. A serial number is not stamped on the replica frame; V-Twin supplies a Bill of Sale referencing the part number.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine Compatibility: Accepts Panhead, Shovelhead, Evolution, and Twin Cam engines with a tin inner primary.\u003c\/li\u003e\n\u003cli\u003eTransmission Compatibility: Works with 4-speed, rigid-mount 5-speed, and rigid-mount 6-speed transmissions, plus Softail-type transmissions.\u003c\/li\u003e\n\u003cli\u003eFuel Tank Compatibility: Accepts 1986–1999 FXST gas tanks.\u003c\/li\u003e\n\u003cli\u003eFrame Design: Replica retro straight leg rigid frame with a 30-degree rake and 2-inch raised neck.\u003c\/li\u003e\n\u003cli\u003eRear Axle Spacing: Provides 9-1\/8 inches between the axle plates.\u003c\/li\u003e\n\u003cli\u003eRear Tire Clearance: Accepts a 140mm rear tire.\u003c\/li\u003e\n\u003cli\u003eBrake Provision: Includes a brake cross shaft and stock rear axle plate for mechanical brakes and star hub wheel use.\u003c\/li\u003e\n\u003cli\u003eDrive Compatibility: Accepts chain final drive.\u003c\/li\u003e\n\u003cli\u003eFitment Notes: May require motor mount modifications, seat post shortening, and seat post reaming for proper fit and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675572039767,"sku":"51-0096","price":6646.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-0008-hardtail-section-for-harley-davidson-xl","title":"V-Twin 51-0008 Hardtail Section for Harley-Davidson XL","description":"Hardtail section for rubber mounted applications.\n\u003cp\u003eThe V-Twin 51-0008 Hardtail Section is designed for Harley-Davidson XL applications. This hardtail section is listed as fitting 2004, 2006, 2007, 2008, 2010, 2012, 2018, 2019, 2022, and 2023 Harley-Davidson XL models.\u003c\/p\u003e\u003cp\u003eThe rear motor mount is a solid mount without isolation bushings. This product is supplied as one unit and has a stated country of origin of China. Use the listed fitment information to determine whether this hardtail section is appropriate for your application.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits listed 2004, 2006, 2007, 2008, 2010, 2012, 2018, 2019, 2022, and 2023 Harley-Davidson XL models\u003c\/li\u003e\n\u003cli\u003eRear Motor Mount: Solid mount without isolation bushings\u003c\/li\u003e\n\u003cli\u003eBrand: V-Twin\u003c\/li\u003e\n\u003cli\u003ePart Number: 51-0008\u003c\/li\u003e\n\u003cli\u003eUnit of Measure: Each\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: China\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n2004 Harley Davidson XL\u003cbr\u003e\n2005 Harley Davidson XL\u003cbr\u003e\n2006 Harley Davidson XL\u003cbr\u003e\n2007 Harley Davidson XL\u003cbr\u003e\n2008 Harley Davidson XL\u003cbr\u003e\n2009 Harley Davidson XL\u003cbr\u003e\n2010 Harley Davidson XL\u003cbr\u003e\n2011 Harley Davidson XL\u003cbr\u003e\n2012 Harley Davidson XL\u003cbr\u003e\n2013 Harley Davidson XL\u003cbr\u003e\n2014 Harley Davidson XL\u003cbr\u003e\n2015 Harley Davidson XL\u003cbr\u003e\n2016 Harley Davidson XL\u003cbr\u003e\n2017 Harley Davidson XL\u003cbr\u003e\n2018 Harley Davidson XL\u003cbr\u003e\n2019 Harley Davidson XL\u003cbr\u003e\n2020 Harley Davidson XL\u003cbr\u003e\n2021 Harley Davidson XL\u003cbr\u003e\n2022 Harley Davidson XL\u003cbr\u003e\n2023 Harley Davidson XL\u003cbr\u003e\n2024 Harley Davidson XL\u003cbr\u003e\n2025 Harley Davidson XL\u003cbr\u003e\n2026 Harley Davidson XL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675572564055,"sku":"51-0008","price":1713.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-0034-replica-wishbone-frame-for-1948-harley-davidson-fl","title":"V-Twin 51-0034 Replica Wishbone Frame for 1948 Harley-Davidson FL","description":"Replica  inchHM inch wishbone frame features forge neck with  inchhallmark inch numbers in forging. Does not include indents or horn mounts on wishbone front legs.\n\u003cp\u003eThe V-Twin 51-0034 Replica Wishbone Frame is designed for 1948 Harley-Davidson FL applications. This frame features a 30-degree rake and includes Hallmark details in its forged components, including axle plates, sidecar loops, front motor mount, rear motor mount, and seat yoke.\u003c\/p\u003e\u003cp\u003ePlease note that no serial numbers are stamped on this replica frame. V-Twin supplies a Bill of Sale referencing part number 51-0034. The frame is supplied as an individual unit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 1948 Harley-Davidson FL\u003c\/li\u003e\n\u003cli\u003eFrame Style: Replica Wishbone Frame\u003c\/li\u003e\n\u003cli\u003eRake: 30 degrees\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes axle plates, sidecar loops, front motor mount, rear motor mount, and seat yoke\u003c\/li\u003e\n\u003cli\u003eDocumentation: Bill of Sale references part number 51-0034\u003c\/li\u003e\n\u003cli\u003eSerial Numbers: No serial numbers are stamped on the replica frame\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675573022807,"sku":"51-0034","price":7555.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-0032-replica-hm-straight-leg-rigid-frame","title":"V-Twin 51-0032 Replica HM Straight Leg Rigid Frame","description":"Replica  inchHM inch straight leg rigid frame is an authentic reproduction of the 1954-1957 straight leg frame with neck frame with hallmarks forged installed.\n\u003cp\u003eThe V-Twin 51-0032 Replica HM Straight Leg Rigid Frame is a mechanical frame designed with a cross tube to accept a mechanical rear brake assembly with a star hub wheel and chain drive. Forged components include the neck, front and rear engine mounts, sidecar mounts, top seat yoke, and footboard tabs. The frame accepts a neck lock and is designed to accept Panhead and Shovelhead engines. A front engine mount spacer allows installation of a Knucklehead or Flathead engine.\u003c\/p\u003e\u003cp\u003eThe V-Twin 51-0032 frame includes the cross shaft, seat post, transmission plate, and rear axle assembly. The replica HM version features forging hallmarks and markings on the seat yoke, front motor mount, sidecar loops, rear axle plates, and front and rear transmission mounts. In some instances, holes may need to be reamed or filed slightly to assemble parts onto the frame. Suggested use with V-Twin part 31-0475 Motor Mount Frame Spacer Front for accepting 1936–1947 Knucklehead or Flathead engines.\u003c\/p\u003e\u003cp\u003eTapered bearing neck cups must be ordered separately. The frame is required to use V-Twin part 24-0121 Zinc Fork Neck Cup Set with Races. V-Twin supplies a Bill of Sale only referencing part number 51-0032. Listed fitment includes 1949, 1951, 1952, 1954, 1960, 1965, 1968, 1972, 1979, and 1983 Harley-Davidson FL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrame Design: Straight leg rigid frame with a cross tube for a mechanical rear brake assembly, star hub wheel, and chain drive.\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes forged neck, front and rear engine mounts, sidecar mounts, top seat yoke, and footboard tabs.\u003c\/li\u003e\n\u003cli\u003eEngine Compatibility: Accepts Panhead and Shovelhead engines; a front engine mount spacer allows installation of a Knucklehead or Flathead engine.\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Cross shaft, seat post, transmission plate, and rear axle assembly are included.\u003c\/li\u003e\n\u003cli\u003eHallmark Details: Replica HM version includes forging hallmarks and markings on specified frame components.\u003c\/li\u003e\n\u003cli\u003eAssembly Note: Some holes may require slight reaming or filing during assembly.\u003c\/li\u003e\n\u003cli\u003eRequired Component: Must be used with V-Twin part 24-0121 Zinc Fork Neck Cup Set with Races.\u003c\/li\u003e\n\u003cli\u003eSuggested Component: V-Twin part 31-0475 Motor Mount Frame Spacer Front is suggested for 1936–1947 Knucklehead or Flathead engines.\u003c\/li\u003e\n\u003cli\u003eFitment: Listed for 1949, 1951, 1952, 1954, 1960, 1965, 1968, 1972, 1979, and 1983 Harley-Davidson FL models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL\u003cbr\u003e\n1958 Harley Davidson FL\u003cbr\u003e\n1959 Harley Davidson FL\u003cbr\u003e\n1960 Harley Davidson FL\u003cbr\u003e\n1961 Harley Davidson FL\u003cbr\u003e\n1962 Harley Davidson FL\u003cbr\u003e\n1963 Harley Davidson FL\u003cbr\u003e\n1964 Harley Davidson FL\u003cbr\u003e\n1965 Harley Davidson FL\u003cbr\u003e\n1966 Harley Davidson FL\u003cbr\u003e\n1967 Harley Davidson FL\u003cbr\u003e\n1968 Harley Davidson FL\u003cbr\u003e\n1969 Harley Davidson FL\u003cbr\u003e\n1970 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson FL\u003cbr\u003e\n1972 Harley Davidson FL\u003cbr\u003e\n1973 Harley Davidson FL\u003cbr\u003e\n1974 Harley Davidson FL\u003cbr\u003e\n1975 Harley Davidson FL\u003cbr\u003e\n1976 Harley Davidson FL\u003cbr\u003e\n1977 Harley Davidson FL\u003cbr\u003e\n1978 Harley Davidson FL\u003cbr\u003e\n1979 Harley Davidson FL\u003cbr\u003e\n1980 Harley Davidson FL\u003cbr\u003e\n1981 Harley Davidson FL\u003cbr\u003e\n1982 Harley Davidson FL\u003cbr\u003e\n1983 Harley Davidson FL\u003cbr\u003e\n1984 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675577577559,"sku":"51-0032","price":6923.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-0080-replica-wishbone-frame-kit","title":"V-Twin 51-0080 Replica Wishbone Frame Kit","description":"Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post  axle  and transmission plate already installed. The legs are smooth and do not have horn mount straps welded on.\n\u003cp\u003eThe V-Twin 51-0080 Replica Wishbone Frame Kit accepts Panhead or Shovelhead engines with a 4-speed transmission. Knucklehead or Flathead engines can be used with a 3\/8-inch front engine mount spacer. This frame kit is designed for 1948–1957 Harley-Davidson FL applications.\u003c\/p\u003e\u003cp\u003eInstalled features include the seat post, axle, transmission plate, mechanical brake cross-shaft bushings, toolbox mount, and grease fittings. The crossbar includes a cable mount tab under the gas tank. Forged components include the neck, front and rear engine mounts, sidecar mounts, top seat post yoke, and rear axle plates. The neck accepts a key lock, and the top mount has an early-shape design.\u003c\/p\u003e\u003cp\u003eThe kit does not include the lower and center gas tank mounts or footboard tabs. It includes the 51-0874 frame top engine mount and a two-piece toolbox mount welded in place. The seat post and cross-shaft bushings may require additional reaming for proper fit. Frames are not accepted for return. No serial numbers are stamped on the replica frame; V-Twin supplies a bill of sale referencing part number 51-0080.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine Compatibility: Accepts Panhead or Shovelhead engines with a 4-speed transmission.\u003c\/li\u003e\n\u003cli\u003eEngine Application: Supports Knucklehead or Flathead engines when used with a 3\/8-inch front engine mount spacer.\u003c\/li\u003e\n\u003cli\u003eInstalled Components: Includes the seat post, axle, transmission plate, mechanical brake cross-shaft bushings, toolbox mount, and grease fittings.\u003c\/li\u003e\n\u003cli\u003eCrossbar Design: Includes a cable mount tab under the gas tank.\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes the neck, front and rear engine mounts, sidecar mounts, top seat post yoke, and rear axle plates.\u003c\/li\u003e\n\u003cli\u003eNeck Design: Accepts a key lock.\u003c\/li\u003e\n\u003cli\u003eTop Mount: Features an early-shape style.\u003c\/li\u003e\n\u003cli\u003eToolbox Mount: Two-piece toolbox mount is welded in place.\u003c\/li\u003e\n\u003cli\u003eIncluded Mount: Includes frame top engine mount 51-0874.\u003c\/li\u003e\n\u003cli\u003eExclusions: Does not include the lower and center gas tank mounts or footboard tabs.\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 1948–1957 Harley-Davidson FL models.\u003c\/li\u003e\n\u003cli\u003eFitment Note: Seat post and cross-shaft bushings may require further reaming for proper fit.\u003c\/li\u003e\n\u003cli\u003eFrame Documentation: Replica frame has no stamped serial numbers; V-Twin supplies a bill of sale referencing part number 51-0080.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL\u003cbr\u003e\n1958 Harley Davidson FL\u003cbr\u003e\n1959 Harley Davidson FL\u003cbr\u003e\n1960 Harley Davidson FL\u003cbr\u003e\n1961 Harley Davidson FL\u003cbr\u003e\n1962 Harley Davidson FL\u003cbr\u003e\n1963 Harley Davidson FL\u003cbr\u003e\n1964 Harley Davidson FL\u003cbr\u003e\n1965 Harley Davidson FL\u003cbr\u003e\n1966 Harley Davidson FL\u003cbr\u003e\n1967 Harley Davidson FL\u003cbr\u003e\n1968 Harley Davidson FL\u003cbr\u003e\n1969 Harley Davidson FL\u003cbr\u003e\n1970 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson Fx\u003cbr\u003e\n1972 Harley Davidson FL\u003cbr\u003e\n1972 Harley Davidson Fx\u003cbr\u003e\n1973 Harley Davidson FL\u003cbr\u003e\n1973 Harley Davidson Fx\u003cbr\u003e\n1974 Harley Davidson FL\u003cbr\u003e\n1974 Harley Davidson Fx\u003cbr\u003e\n1975 Harley Davidson FL\u003cbr\u003e\n1975 Harley Davidson Fx\u003cbr\u003e\n1976 Harley Davidson FL\u003cbr\u003e\n1976 Harley Davidson Fx\u003cbr\u003e\n1977 Harley Davidson FL\u003cbr\u003e\n1977 Harley Davidson Fx\u003cbr\u003e\n1978 Harley Davidson FL\u003cbr\u003e\n1978 Harley Davidson Fx\u003cbr\u003e\n1979 Harley Davidson FL\u003cbr\u003e\n1979 Harley Davidson Fx\u003cbr\u003e\n1980 Harley Davidson FL\u003cbr\u003e\n1980 Harley Davidson Fx\u003cbr\u003e\n1981 Harley Davidson FL\u003cbr\u003e\n1981 Harley Davidson Fx\u003cbr\u003e\n1982 Harley Davidson FL\u003cbr\u003e\n1982 Harley Davidson Fx\u003cbr\u003e\n1983 Harley Davidson FL\u003cbr\u003e\n1983 Harley Davidson Fx\u003cbr\u003e\n1984 Harley Davidson FL\u003cbr\u003e\n1984 Harley Davidson Fx","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675577774167,"sku":"51-0080","price":6892.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"xl-rigid-frame-20010-sku-51-0004","title":"XL Rigid Frame 20010, SKU 51-0004","description":"XL rigid frame is for use with rubber mounted engines. Frame features 30 rake with no stretch.\n\u003cp\u003eThe XL Rigid Frame, part number 20010 and SKU 51-0004, is designed for Harley-Davidson XL models from 2004 through 2013. This frame provides a rigid-frame foundation for applicable XL motorcycle projects and custom builds.\u003c\/p\u003e\u003cp\u003eCompatibility includes 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013 Harley-Davidson XL models. The frame measures 33 inches in length, 24 inches in width, and 8 inches in height, with a listed weight of 176 pounds.\u003c\/p\u003e\u003cp\u003eThe supplier suggests using a solid mount conversion kit with this frame. Accessory options include the Flanders Spring Fork Riser\/Tree Kit, XL Rigid Tool Box Kit, Chrome Weld-on Kickstand Kit, and Center Post Mount Wrap Around Oil Tank Chrome. Review the accessory requirements and vehicle application before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: XL rigid frame\u003c\/li\u003e\n\u003cli\u003ePart Number: 20010\u003c\/li\u003e\n\u003cli\u003eSKU: 51-0004\u003c\/li\u003e\n\u003cli\u003eFitment: 2004–2013 Harley-Davidson XL models\u003c\/li\u003e\n\u003cli\u003eConstruction: Rigid-frame design\u003c\/li\u003e\n\u003cli\u003eMounting Guidance: Supplier suggests using a solid mount conversion kit with this frame\u003c\/li\u003e\n\u003cli\u003eDimensions: 33 inches long, 24 inches wide, and 8 inches high\u003c\/li\u003e\n\u003cli\u003eWeight: 176 pounds\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: China\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n2004 Harley Davidson XL\u003cbr\u003e\n2005 Harley Davidson XL\u003cbr\u003e\n2006 Harley Davidson XL\u003cbr\u003e\n2007 Harley Davidson XL\u003cbr\u003e\n2008 Harley Davidson XL\u003cbr\u003e\n2009 Harley Davidson XL\u003cbr\u003e\n2010 Harley Davidson XL\u003cbr\u003e\n2011 Harley Davidson XL\u003cbr\u003e\n2012 Harley Davidson XL\u003cbr\u003e\n2013 Harley Davidson XL\u003cbr\u003e\n2014 Harley Davidson XL\u003cbr\u003e\n2015 Harley Davidson XL\u003cbr\u003e\n2016 Harley Davidson XL\u003cbr\u003e\n2017 Harley Davidson XL\u003cbr\u003e\n2018 Harley Davidson XL\u003cbr\u003e\n2019 Harley Davidson XL\u003cbr\u003e\n2020 Harley Davidson XL","brand":"VTwin cloned at 14:29:52","offers":[{"title":"Default Title","offer_id":44675578134615,"sku":"51-0004","price":3671.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-0031-replica-hm-wishbone-rigid-frame","title":"V-Twin 51-0031 Replica HM Wishbone Rigid Frame","description":"Replica  inchHM inch wishbone frame includes a hallmark forged neck and horn mount tabs on wishbone tubes.\n\u003cp\u003eThe V-Twin 51-0031 Replica HM Wishbone Rigid Frame is a kit featuring forged components for select Harley-Davidson FL applications. The assembly includes axle plates, sidecar loops, front motor mount, rear motor mount, seat yoke, rear forging engine, and wishbone sidecar components.\u003c\/p\u003e\u003cp\u003eThis rigid frame kit fits 1949, 1950, 1951, and 1952 Harley-Davidson FL models. The product is supplied as a kit and is manufactured in Taiwan. Use the V-Twin 51-0031 part number when identifying this frame kit for your restoration or replacement project.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged Components: Includes axle plates, sidecar loops, front motor mount, rear motor mount, seat yoke, rear forging engine, and wishbone sidecar components.\u003c\/li\u003e\n\u003cli\u003eApplication: Fits 1949, 1950, 1951, and 1952 Harley-Davidson FL models.\u003c\/li\u003e\n\u003cli\u003eProduct Type: Replica HM wishbone rigid frame kit.\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Taiwan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675579117655,"sku":"51-0031","price":7555.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-0030-bull-neck-knucklehead-frame","title":"V-Twin 51-0030 Bull Neck Knucklehead Frame","description":"Knucklehead bull neck frame features a 30 rake with brazed components at rear section and is machined to accept early rectangular tool box.\n\u003cp\u003eThe V-Twin 51-0030 Bull Neck Knucklehead Frame features hallmarks on the rear axle plates, seat post yoke, and front and rear motor mount. This frame is designed for applications listed for select Harley-Davidson EL and FL models from 1940 through 1947.\u003c\/p\u003e\u003cp\u003eFitment includes 1940–1944 Harley-Davidson EL models, 1942–1947 Harley-Davidson FL models, and the 1941 Harley-Davidson FL. The V-Twin 51-0030 frame is supplied as an individual unit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHallmarks: Located on the rear axle plates, seat post yoke, and front and rear motor mount\u003c\/li\u003e\n\u003cli\u003eFitment: Fits select 1940–1944 Harley-Davidson EL and 1941–1947 Harley-Davidson FL models\u003c\/li\u003e\n\u003cli\u003eBrand: V-Twin\u003c\/li\u003e\n\u003cli\u003ePart Number: 51-0030\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1939 Harley Davidson EL\u003cbr\u003e\n1940 Harley Davidson EL\u003cbr\u003e\n1941 Harley Davidson EL\u003cbr\u003e\n1941 Harley Davidson FL\u003cbr\u003e\n1942 Harley Davidson EL\u003cbr\u003e\n1942 Harley Davidson FL\u003cbr\u003e\n1943 Harley Davidson EL\u003cbr\u003e\n1943 Harley Davidson FL\u003cbr\u003e\n1944 Harley Davidson EL\u003cbr\u003e\n1944 Harley Davidson FL\u003cbr\u003e\n1945 Harley Davidson EL\u003cbr\u003e\n1945 Harley Davidson FL\u003cbr\u003e\n1946 Harley Davidson EL\u003cbr\u003e\n1946 Harley Davidson FL\u003cbr\u003e\n1947 Harley Davidson EL\u003cbr\u003e\n1947 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675581509719,"sku":"51-0030","price":7285.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-64217-3-8-inch-rigid-frame-bung-set-sku-51-0059","title":"V-Twin 64217 3\/8-Inch Rigid Frame Bung Set, SKU 51-0059","description":"Cadmium rigid frame bung set is 3\/8 inch-16 thread and is for use on rear axle plate holes for side mount plate bracket on stock or replica rigid frames.\n\u003cp\u003eThe V-Twin 64217 3\/8-inch Rigid Frame Bung Set, SKU 51-0059, is designed to allow tail lamp and accessory installations. This set includes two bungs and is identified by the manufacturer as a set of 2.\u003c\/p\u003e\u003cp\u003eDesigned for use with select Harley-Davidson FL and EL applications, this V-Twin frame bung set fits the listed 1942–1954 models. Confirm the specific motorcycle application before installation to ensure proper use with the intended tail lamp or accessory setup.\u003c\/p\u003e\u003cp\u003eCompatible accessory items listed for this product include the Vertical Side Mount Tail Lamp Kit, Side Mount Tail Lamp Kit, Vertical Side Mount Tail Lamp Bracket, and Tail Lamp License Plate Holder Chrome. The V-Twin 64217 frame bung set is supplied as SKU 51-0059.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: V-Twin\u003c\/li\u003e\n\u003cli\u003ePart Number: 64217\u003c\/li\u003e\n\u003cli\u003eSKU: 51-0059\u003c\/li\u003e\n\u003cli\u003eProduct Type: 3\/8-inch rigid frame bung set\u003c\/li\u003e\n\u003cli\u003eQuantity: Sold as a set of 2\u003c\/li\u003e\n\u003cli\u003eApplication: Allows tail lamp and accessory installations\u003c\/li\u003e\n\u003cli\u003eFitment: Fits the listed 1942–1954 Harley-Davidson FL and EL models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1936 Harley Davidson EL\u003cbr\u003e\n1937 Harley Davidson EL\u003cbr\u003e\n1938 Harley Davidson EL\u003cbr\u003e\n1939 Harley Davidson EL\u003cbr\u003e\n1940 Harley Davidson EL\u003cbr\u003e\n1941 Harley Davidson EL\u003cbr\u003e\n1941 Harley Davidson FL\u003cbr\u003e\n1942 Harley Davidson EL\u003cbr\u003e\n1942 Harley Davidson FL\u003cbr\u003e\n1943 Harley Davidson EL\u003cbr\u003e\n1943 Harley Davidson FL\u003cbr\u003e\n1944 Harley Davidson EL\u003cbr\u003e\n1944 Harley Davidson FL\u003cbr\u003e\n1945 Harley Davidson EL\u003cbr\u003e\n1945 Harley Davidson FL\u003cbr\u003e\n1946 Harley Davidson EL\u003cbr\u003e\n1946 Harley Davidson FL\u003cbr\u003e\n1947 Harley Davidson EL\u003cbr\u003e\n1947 Harley Davidson FL\u003cbr\u003e\n1948 Harley Davidson EL\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson EL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson EL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson EL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson EL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44675592552535,"sku":"51-0059","price":63.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1941-replica-knucklehead-frame","title":"V-Twin 51-1941 Replica Knucklehead Frame","description":"Knucklehead rigid frame is an authentic reproduction of the factory style frame.\n\u003cp\u003eThe V-Twin 51-1941 Replica Knucklehead Frame includes the seat post assembly, transmission mount plate, and rear axle kit installed. Its 29-degree neck angle accepts inline spring forks, and the frame includes exact replica saddles brazed at each end for rear crossbar support.\u003c\/p\u003e\u003cp\u003eThis frame measures 13-11\/16 inches from the rear motor mount, following the seat post and straight up to the backbone. The frame requires separate purchase of a clamp-on coil bracket kit. Seat post and cross shaft bushings may require additional reaming for proper fit; therefore, frames will not be accepted for return.\u003c\/p\u003e\u003cp\u003eThe V-Twin 51-1941 frame fits select 1941–1946 Harley-Davidson FL, EL, and U applications. The replica frame has no stamped serial numbers. V-Twin MFG supplies a Bill of Sale referencing part number 51-1941. The OEM cross references are 47003-41 and 2802-41.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand and SKU: V-Twin 51-1941\u003c\/li\u003e\n\u003cli\u003eProduct Type: Replica Knucklehead frame\u003c\/li\u003e\n\u003cli\u003eIncluded Assembly: Seat post assembly installed\u003c\/li\u003e\n\u003cli\u003eTransmission Mount: Transmission mount plate installed\u003c\/li\u003e\n\u003cli\u003eRear Axle: Rear axle kit installed\u003c\/li\u003e\n\u003cli\u003eNeck Angle: 29 degrees; accepts inline spring forks\u003c\/li\u003e\n\u003cli\u003eCrossbar Support: Exact replica saddles brazed at each end for rear crossbar support\u003c\/li\u003e\n\u003cli\u003eCoil Bracket: Requires purchase of a clamp-on coil bracket kit\u003c\/li\u003e\n\u003cli\u003eBushing Fitment: Seat post and cross shaft bushings may require further reaming for proper fit\u003c\/li\u003e\n\u003cli\u003eSerial Numbers: No serial numbers are stamped on the replica frame\u003c\/li\u003e\n\u003cli\u003eDocumentation: Bill of Sale supplied by V-Twin MFG referencing part number 51-1941\u003c\/li\u003e\n\u003cli\u003eOEM Cross Reference: 47003-41 and 2802-41\u003c\/li\u003e\n\u003cli\u003eFitment: 1941–1946 Harley-Davidson FL, EL, and U applications as specified by the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1941 Harley Davidson EL\u003cbr\u003e\n1941 Harley Davidson FL\u003cbr\u003e\n1941 Harley Davidson U\u003cbr\u003e\n1942 Harley Davidson EL\u003cbr\u003e\n1942 Harley Davidson FL\u003cbr\u003e\n1942 Harley Davidson U\u003cbr\u003e\n1943 Harley Davidson EL\u003cbr\u003e\n1943 Harley Davidson FL\u003cbr\u003e\n1943 Harley Davidson U\u003cbr\u003e\n1944 Harley Davidson EL\u003cbr\u003e\n1944 Harley Davidson FL\u003cbr\u003e\n1944 Harley Davidson U\u003cbr\u003e\n1945 Harley Davidson EL\u003cbr\u003e\n1945 Harley Davidson FL\u003cbr\u003e\n1945 Harley Davidson U\u003cbr\u003e\n1946 Harley Davidson EL\u003cbr\u003e\n1946 Harley Davidson FL\u003cbr\u003e\n1946 Harley Davidson U","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678796247127,"sku":"51-1941","price":6597.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1940-replica-knucklehead-frame-28-rake-for-1938-1940-harley-davidson-el","title":"V-Twin 51-1940 Replica Knucklehead Frame, 28° Rake for 1938-1940 Harley-Davidson EL","description":"Replica frame is an authentic reproduction of the factory style with brazed joints. Frame will accommodate Knucklehead or Big Twin Flathead engines and 3 or 4-speed transmission. The 28 rake neck angle will accept inline spring forks.\n\u003cp\u003eThe V-Twin 51-1940 Replica Knucklehead Frame features a 28° rake and is designed for 1938, 1939, and 1940 Harley-Davidson EL applications. The frame includes the seat post, mechanical brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate pre-installed for safer shipping. Cross shaft bushings, a tool box mount, and grease fittings are also installed.\u003c\/p\u003e\u003cp\u003eConstruction includes forged components such as the neck with original DIF forging marks, front and rear engine mounts, yoke, and rear axle plates. Brazed components include the top motor mount, front tank mount, sidecar loops, footboard mount, transmission strap, center post strap, rear fender cross bar saddles, oil tank mount, and upper rear frame bars at the tank tube. This new-production frame has 13 brazed joints, matching the original construction.\u003c\/p\u003e\u003cp\u003eThe tool box pads are round but positioned to mount a rectangular tool box. The seat post and cross shaft bushings may require further reaming for proper fit. Due to this potential fitting requirement, frames will not be accepted for return. There are no serial numbers stamped on the replica frame; V-Twin MFG supplies a Bill of Sale referencing part number 51-1940 only.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 1938, 1939, and 1940 Harley-Davidson EL models\u003c\/li\u003e\n\u003cli\u003eRake: 28° rake\u003c\/li\u003e\n\u003cli\u003ePre-Installed Components: Seat post, mechanical brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate\u003c\/li\u003e\n\u003cli\u003eInstalled Hardware: Cross shaft bushings, tool box mount, and grease fittings\u003c\/li\u003e\n\u003cli\u003eForged Construction: Neck with original DIF forging marks, front and rear engine mounts, yoke, and rear axle plates\u003c\/li\u003e\n\u003cli\u003eBrazed Construction: Includes 13 brazed joints and multiple original-style frame components\u003c\/li\u003e\n\u003cli\u003eTool Box Mounting: Round tool box pads are positioned to mount a rectangular tool box\u003c\/li\u003e\n\u003cli\u003eFitment Note: Seat post and cross shaft bushings may require further reaming for proper fit\u003c\/li\u003e\n\u003cli\u003eIdentification: No serial numbers are stamped on the replica frame; a Bill of Sale references part number 51-1940\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1938 Harley Davidson EL\u003cbr\u003e\n1939 Harley Davidson EL\u003cbr\u003e\n1940 Harley Davidson EL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678802210903,"sku":"51-1940","price":6744.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1956-replica-straight-leg-rigid-frame-for-1954-1957-harley-davidson-fl","title":"V-Twin 51-1956 Replica Straight Leg Rigid Frame for 1954-1957 Harley-Davidson FL","description":"Replica straight leg rigid frame is for chain drive models.\n\u003cp\u003eThe V-Twin 51-1956 Replica Straight Leg Rigid Frame is an authentic reproduction of the 1954-1957 straight leg frame, featuring a stock 30-degree neck rake. It fits 1954, 1955, 1956 and 1957 Harley-Davidson FL models. This frame is designed for motorcycle restoration and custom build applications.\u003c\/p\u003e\u003cp\u003eForged components include the neck, front and rear engine mounts, sidecar mounts, top seat yoke, axle, seat post and footboard tabs. The included front engine mount spacer allows installation of a 1936-1947 Knucklehead or Flathead engine in an applicable 1948-up frame. The frame also features a #31-0528 Replica Tool Box Mounting Bracket.\u003c\/p\u003e\u003cp\u003eIncluded components are the seat post, transmission mount plate, rear axle and brake cross shaft. The cross shaft may be removed for hydraulic or disc brake use. Disc and drum brake tabs are available separately; suggested options are #51-0512 for disc brakes and #51-0511 for drum brakes. The seat post bushing, seat post assembly, brake cross shaft and mechanical brake cross tube bushing may require reaming before assembly for proper fit.\u003c\/p\u003e\u003cp\u003eThis V-Twin 51-1956 frame has an indent on the left lower rear frame bar from the tooling fixture and is not accepted for return due to potential fitting and assembly requirements. V-Twin MFG supplies a Bill of Sale referencing the part number. UPS may classify this item as oversized for shipping based on packaging.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAuthentic Reproduction: Reproduces the 1954-1957 straight leg rigid frame design.\u003c\/li\u003e\n\u003cli\u003eNeck Rake: Features a stock 30-degree neck rake.\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes forged neck, front and rear engine mounts, sidecar mounts, top seat yoke, axle, seat post and footboard tabs.\u003c\/li\u003e\n\u003cli\u003eEngine Mount Spacer: Allows installation of a 1936-1947 Knucklehead or Flathead engine in an applicable 1948-up frame.\u003c\/li\u003e\n\u003cli\u003eTool Box Mounting Bracket: Features a #31-0528 Replica Tool Box Mounting Bracket.\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Includes seat post, transmission mount plate, rear axle and brake cross shaft.\u003c\/li\u003e\n\u003cli\u003eBrake Configuration: Cross shaft may be removed for hydraulic or disc brake use; disc and drum brake tabs are available separately.\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 1954, 1955, 1956 and 1957 Harley-Davidson FL models.\u003c\/li\u003e\n\u003cli\u003eAssembly Note: Certain bushings and assemblies may require reaming before assembly for proper fit.\u003c\/li\u003e\n\u003cli\u003eReturn Notice: The frame is not accepted for return due to potential fitting and assembly requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678804275287,"sku":"51-1956","price":6696.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1939-replica-hm-knucklehead-28-rake-frame","title":"V-Twin 51-1939 Replica HM Knucklehead 28° Rake Frame","description":"Replica frame is an authentic reproduction of the factory style featuring 13 brazed joints. The 28 rake neck angle will accept inline spring forks. Features original DIF forging marks on the left side of the neck.\n\u003cp\u003eThe V-Twin 51-1939 Replica HM Knucklehead 28° Rake Frame is designed to accommodate Knucklehead or Big Twin Flathead engines with a 3-speed or 4-speed transmission. Its horizontal frame crossbar uses 7\/8-inch outside-diameter tubing. The frame includes a seat post, mechanical brake cross shaft, rear axle assembly, transmission plate and motor alignment plate for shipping support.\u003c\/p\u003e\u003cp\u003eThis updated replica frame features forged components with forging hallmarks, including the neck, front and rear motor mounts, seat yoke, sidecar loops and rear axle plates. Cross shaft bushings, a seat post bushing, a vertical toolbox mount bracket, a correct toolbox mount and grease fittings are pre-installed. The rear brake slot on the left rear axle plate remains closed for the builder to cut open as desired for an original appearance.\u003c\/p\u003e\u003cp\u003eThe V-Twin 51-1939 frame fits 1938, 1939 and 1940 Harley-Davidson EL and UL models. A clamp-on coil bracket kit, part number 49-0099, is required separately. Some holes may require slight reaming or filing during assembly, and the seat post and cross shaft bushings may require further reaming for proper fit. Install the seat before the gas tanks and place a #6320 washer between the tank and frame tab during installation. This replica frame has no stamped serial numbers; V-Twin supplies a bill of sale referencing part number 51-1939.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine and Transmission Accommodation: Accommodates Knucklehead or Big Twin Flathead engines with 3-speed or 4-speed transmissions.\u003c\/li\u003e\n\u003cli\u003eFrame Crossbar: Features a horizontal crossbar made from 7\/8-inch outside-diameter tubing.\u003c\/li\u003e\n\u003cli\u003eIncluded Frame Components: Includes a seat post, mechanical brake cross shaft, rear axle assembly, transmission plate and motor alignment plate.\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes forged hallmarked neck, front and rear motor mounts, seat yoke, sidecar loops and rear axle plates.\u003c\/li\u003e\n\u003cli\u003ePre-Installed Components: Cross shaft bushings, seat post bushing, vertical toolbox mount bracket, correct toolbox mount and grease fittings are pre-installed.\u003c\/li\u003e\n\u003cli\u003eRear Axle Plate: Left rear brake slot is closed for the builder to cut open as desired.\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 1938, 1939 and 1940 Harley-Davidson EL and UL models.\u003c\/li\u003e\n\u003cli\u003eAssembly Note: Some holes and bushings may require reaming or filing for proper fit.\u003c\/li\u003e\n\u003cli\u003eSerial Number Information: Replica frame has no stamped serial numbers; a bill of sale referencing part number 51-1939 is supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1938 Harley Davidson EL\u003cbr\u003e\n1938 Harley Davidson UL\u003cbr\u003e\n1939 Harley Davidson EL\u003cbr\u003e\n1939 Harley Davidson UL\u003cbr\u003e\n1940 Harley Davidson EL\u003cbr\u003e\n1940 Harley Davidson UL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678808371287,"sku":"51-1939","price":7894.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-3575-200-xl-rigid-frame-with-40-degree-rake","title":"V-Twin 51-3575 200 XL Rigid Frame with 40-Degree Rake","description":"200 XL rigid frame features a 40 rake with a 3 inch stretch in front legs to accept a 1-1\/8 inch belt with 200 series tire.\n\u003cp\u003eThe V-Twin 51-3575 200 XL Rigid Frame with 40-degree rake is designed for 1957–1985 XL models and accepts a right-side-drive transmission. This disc-brake-type frame includes a welded kickstand tab, battery box mount, front motor plate mounts, and rear motor plate mounts. The motor mounts allow 1957–1984 Ironhead motors to be installed.\u003c\/p\u003e\u003cp\u003eThe frame is supplied with a Manufacturer's Statement of Origin. It does not include a cross-shaft provision for mechanical brakes; this provision is available separately as required. Additional tabs and brackets may be needed as the build progresses, so mounting requirements for the sissy bar, oil tank, battery, kickstand, and rear fender should be considered before painting and final assembly. Pre-build the motorcycle first, then disassemble it before the final build.\u003c\/p\u003e\u003cp\u003eThe rear axle plate slot is 3\/4 inch wide. Use spacers with 3\/4-inch flats to fit plates with a 9\/16-inch axle hole. This frame is required to be used with the V-Twin 51-0389 XL Brake Shaft Tube and is suggested for use with the 44-0763 9\/16-inch Rear Axle Adapter Spacer Set. Check the drain plug location for crankcase clearance, as the frame cross brace may require clearance to allow access to the engine drain plug.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: For 1957–1985 XL models.\u003c\/li\u003e\n\u003cli\u003eTransmission: Accepts a right-side-drive transmission.\u003c\/li\u003e\n\u003cli\u003eBrake Type: Disc-brake-type frame without a cross-shaft provision for mechanical brakes.\u003c\/li\u003e\n\u003cli\u003eMotor Mounts: Includes front and rear motor plate mounts for installing 1957–1984 Ironhead motors.\u003c\/li\u003e\n\u003cli\u003eWelded Mounts: Kickstand tab and battery box mount are welded in place.\u003c\/li\u003e\n\u003cli\u003eRear Axle Plate Slot: 3\/4 inch wide.\u003c\/li\u003e\n\u003cli\u003eRequired Accessory: Must be used with the 51-0389 XL Brake Shaft Tube.\u003c\/li\u003e\n\u003cli\u003eSuggested Accessory: Suggested for use with the 44-0763 9\/16-inch Rear Axle Adapter Spacer Set.\u003c\/li\u003e\n\u003cli\u003eDocumentation: Manufacturer's Statement of Origin is supplied for the frame.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1957 Harley Davidson XL\u003cbr\u003e\n1958 Harley Davidson XL\u003cbr\u003e\n1959 Harley Davidson XL\u003cbr\u003e\n1960 Harley Davidson XL\u003cbr\u003e\n1961 Harley Davidson XL\u003cbr\u003e\n1962 Harley Davidson XL\u003cbr\u003e\n1963 Harley Davidson XL\u003cbr\u003e\n1964 Harley Davidson XL\u003cbr\u003e\n1965 Harley Davidson XL\u003cbr\u003e\n1966 Harley Davidson XL\u003cbr\u003e\n1967 Harley Davidson XL\u003cbr\u003e\n1968 Harley Davidson XL\u003cbr\u003e\n1969 Harley Davidson XL\u003cbr\u003e\n1970 Harley Davidson XL\u003cbr\u003e\n1971 Harley Davidson XL\u003cbr\u003e\n1972 Harley Davidson XL\u003cbr\u003e\n1973 Harley Davidson XL\u003cbr\u003e\n1974 Harley Davidson XL\u003cbr\u003e\n1975 Harley Davidson XL\u003cbr\u003e\n1976 Harley Davidson XL\u003cbr\u003e\n1977 Harley Davidson XL\u003cbr\u003e\n1978 Harley Davidson XL\u003cbr\u003e\n1979 Harley Davidson XL\u003cbr\u003e\n1980 Harley Davidson XL\u003cbr\u003e\n1981 Harley Davidson XL\u003cbr\u003e\n1982 Harley Davidson XL\u003cbr\u003e\n1983 Harley Davidson XL\u003cbr\u003e\n1984 Harley Davidson XL\u003cbr\u003e\n1985 Harley Davidson XL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678812336215,"sku":"51-3575","price":2657.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1955-replica-hm-straight-leg-rigid-frame-for-1948-1957-harley-davidson-fl","title":"V-Twin 51-1955 Replica HM Straight Leg Rigid Frame for 1948-1957 Harley-Davidson FL","description":"Replica  inchHM inch straight leg rigid frame is an authentic reproduction of the 1954-1957 straight leg frame with stock 30 neck rake.\n\u003cp\u003eThe V-Twin 51-1955 Replica HM Straight Leg Rigid Frame is designed for 1948-1957 Harley-Davidson FL applications. This mechanical frame features a cross tube for accepting a mechanical rear brake assembly with a star hub wheel and chain drive. It includes forged components such as the neck, front and rear engine mounts, sidecar mounts, top seat yoke, and footboard tabs.\u003c\/p\u003e\u003cp\u003eThe frame accepts a neck lock and is compatible with Panhead and Shovelhead engines. The front engine mount spacer allows installation of a Knucklehead or Flathead engine in 1948-and-later frames when used with the specified spacer. Included components are the cross shaft, seat post, transmission plate, and rear axle assembly. The frame also features a replica tool box mounting bracket.\u003c\/p\u003e\u003cp\u003eThis updated V-Twin 51-1955 replica frame includes forging hallmarks and marks on the seat yoke, front motor mount, sidecar loops, rear axle plates, and front and rear transmission mounts. Some holes may require slight reaming or filing during assembly. Tapered bearing neck cups must be ordered separately, and the frame is required to be used with the #24-0121 Zinc Fork Neck Cup Set with Races. V-Twin supplies a Bill of Sale referencing the part number.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 1948-1957 Harley-Davidson FL models\u003c\/li\u003e\n\u003cli\u003eFrame Design: Replica HM straight leg rigid mechanical frame\u003c\/li\u003e\n\u003cli\u003eBrake Provision: Cross tube accepts a mechanical rear brake assembly with a star hub wheel and chain drive\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes the neck, front and rear engine mounts, sidecar mounts, top seat yoke, and footboard tabs\u003c\/li\u003e\n\u003cli\u003eEngine Compatibility: Accepts Panhead and Shovelhead engines\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Cross shaft, seat post, transmission plate, and rear axle assembly\u003c\/li\u003e\n\u003cli\u003eNeck Lock: Frame accepts a neck lock\u003c\/li\u003e\n\u003cli\u003eHallmarks: Updated replica design includes forging hallmarks and marks on specified frame components\u003c\/li\u003e\n\u003cli\u003eAssembly Note: Some holes may require slight reaming or filing for assembly\u003c\/li\u003e\n\u003cli\u003eRequired Component: Use with #24-0121 Zinc Fork Neck Cup Set with Races\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL\u003cbr\u003e\n1958 Harley Davidson FL\u003cbr\u003e\n1959 Harley Davidson FL\u003cbr\u003e\n1960 Harley Davidson FL\u003cbr\u003e\n1961 Harley Davidson FL\u003cbr\u003e\n1962 Harley Davidson FL\u003cbr\u003e\n1963 Harley Davidson FL\u003cbr\u003e\n1964 Harley Davidson FL\u003cbr\u003e\n1965 Harley Davidson FL\u003cbr\u003e\n1966 Harley Davidson FL\u003cbr\u003e\n1967 Harley Davidson FL\u003cbr\u003e\n1968 Harley Davidson FL\u003cbr\u003e\n1969 Harley Davidson FL\u003cbr\u003e\n1970 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson FL\u003cbr\u003e\n1972 Harley Davidson FL\u003cbr\u003e\n1973 Harley Davidson FL\u003cbr\u003e\n1974 Harley Davidson FL\u003cbr\u003e\n1975 Harley Davidson FL\u003cbr\u003e\n1976 Harley Davidson FL\u003cbr\u003e\n1977 Harley Davidson FL\u003cbr\u003e\n1978 Harley Davidson FL\u003cbr\u003e\n1979 Harley Davidson FL\u003cbr\u003e\n1980 Harley Davidson FL\u003cbr\u003e\n1981 Harley Davidson FL\u003cbr\u003e\n1982 Harley Davidson FL\u003cbr\u003e\n1983 Harley Davidson FL\u003cbr\u003e\n1984 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678815678551,"sku":"51-1955","price":6921.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-knucklehead-ul-frame-kit-55-0555","title":"V-Twin Knucklehead UL Frame Kit 55-0555","description":"Replica frame is an authentic reproduction of the factory style featuring 13 brazed joints. The 28 rake neck angle will accept inline spring forks. Features original DIF forging marks on the left side of the neck.\n\u003cp\u003eThe V-Twin Knucklehead UL Frame Kit, SKU 55-0555, accommodates Knucklehead or Big Twin Flathead engines with 3- or 4-speed transmissions. The horizontal frame cross bar uses 7\/8-inch outside-diameter tubing. This kit includes a seat post, mechanical brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate for safer shipping.\u003c\/p\u003e\u003cp\u003eCross shaft bushings, a seat post bushing, the correct toolbox mount, and grease fittings are pre-installed. The updated Knucklehead frame features forged neck, front and rear motor mounts, yoke, sidecar loops, and rear axle plates marked “Hot Forged.” For an original look, the rear brake slot on the left rear axle plate is left closed for the builder to cut out as desired.\u003c\/p\u003e\u003cp\u003eThe V-Twin 55-0555 frame kit is required to use the 49-0099 Parkerized Coil Mount Kit. Some holes may require slight reaming or filing during assembly, and the seat post and cross shaft bushings may require additional reaming for proper fit. The replica frame has no stamped serial numbers; V-Twin supplies a bill of sale referencing the part number. Fitment listed for 1938, 1939, and 1940 Harley-Davidson EL and UL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine and Transmission Accommodation: Designed to accommodate Knucklehead or Big Twin Flathead engines with 3- or 4-speed transmissions.\u003c\/li\u003e\n\u003cli\u003eFrame Cross Bar: Features 7\/8-inch outside-diameter tubing.\u003c\/li\u003e\n\u003cli\u003eIncluded Frame Components: Includes a seat post, mechanical brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate.\u003c\/li\u003e\n\u003cli\u003ePre-Installed Components: Cross shaft bushings, seat post bushing, toolbox mount, and grease fittings are pre-installed.\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes forged neck, front and rear motor mounts, yoke, sidecar loops, and rear axle plates with “Hot Forged” markings.\u003c\/li\u003e\n\u003cli\u003eRear Brake Slot: The left rear axle plate brake slot is left closed for the builder to cut out as desired.\u003c\/li\u003e\n\u003cli\u003eAssembly Notes: Some holes may require reaming or filing, and bushings may require further reaming for proper fit.\u003c\/li\u003e\n\u003cli\u003eRequired Accessory: Must be used with the 49-0099 Parkerized Coil Mount Kit.\u003c\/li\u003e\n\u003cli\u003eFitment: Listed for 1938, 1939, and 1940 Harley-Davidson EL and UL models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1938 Harley Davidson EL\u003cbr\u003e\n1938 Harley Davidson UL\u003cbr\u003e\n1939 Harley Davidson EL\u003cbr\u003e\n1939 Harley Davidson UL\u003cbr\u003e\n1940 Harley Davidson EL\u003cbr\u003e\n1940 Harley Davidson UL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678819741783,"sku":"55-0555","price":16404.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-4199-century-rigid-frame","title":"V-Twin 51-4199 Century Rigid Frame","description":"Raw century rigid frame features a 1970's design.\n\u003cp\u003eThe V-Twin 51-4199 Century Rigid Frame is designed for applications using a front-mount engine mount that bolts beneath the front motor mount pad with two front motor mount bolts. The frame is not fitted with forward motor mounts for the crossbar, allowing the mount to be bolted or welded in place using a hole pattern intended to accept 1941–1999-type forward controls.\u003c\/p\u003e\u003cp\u003eThis design originated in the 1970s from Bill York of Motoshop in Oxnard, California, and was used in the construction of Pumkin Puss in 1977. For forward-control applications, use the frame front lower engine mount to position the mount beneath the front motor mount; this component must be ordered separately. Oil tanks must also be ordered separately.\u003c\/p\u003e\u003cp\u003eThe V-Twin 51-4199 Century Rigid Frame can be fitted with mid-control brake and shifter pedals. Suggested oil tank options include the #40-1769 Century Rigid Oil Tank Raw and #40-1770 Century Rigid Oil Tank Chrome. The listed fitment includes select Harley-Davidson FL and FXST models from 1942 through 1994. Please verify the application and mounting requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront Engine Mount Design: Bolts beneath the front motor mount pad using two front motor mount bolts.\u003c\/li\u003e\n\u003cli\u003eForward Control Preparation: May be bolted or welded in place using a hole pattern for 1941–1999-type forward controls.\u003c\/li\u003e\n\u003cli\u003eControl Compatibility: Can be fitted with mid-control brake and shifter pedals.\u003c\/li\u003e\n\u003cli\u003eApplication Note: Use the frame front lower engine mount to position the mount beneath the front motor mount for forward-control applications; ordered separately.\u003c\/li\u003e\n\u003cli\u003eSuggested Oil Tanks: Compatible product suggestions include #40-1769 Century Rigid Oil Tank Raw and #40-1770 Century Rigid Oil Tank Chrome.\u003c\/li\u003e\n\u003cli\u003eFitment: Listed for select Harley-Davidson FL and FXST models from 1942 through 1994.\u003c\/li\u003e\n\u003cli\u003eAccessory Items: 51-0081 - Evolution Rigid Project Ensemble, 44-0386 - Rigid Axle Sissy Bar Mount Tab Set, 51-0849 - Rear Rigid Hardtail Section, 30-1661 - Evolution Upsweep Megaphone Kit Rigid\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1941 Harley Davidson FL\u003cbr\u003e\n1942 Harley Davidson FL\u003cbr\u003e\n1943 Harley Davidson FL\u003cbr\u003e\n1944 Harley Davidson FL\u003cbr\u003e\n1945 Harley Davidson FL\u003cbr\u003e\n1946 Harley Davidson FL\u003cbr\u003e\n1947 Harley Davidson FL\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL\u003cbr\u003e\n1958 Harley Davidson FL\u003cbr\u003e\n1959 Harley Davidson FL\u003cbr\u003e\n1960 Harley Davidson FL\u003cbr\u003e\n1961 Harley Davidson FL\u003cbr\u003e\n1962 Harley Davidson FL\u003cbr\u003e\n1963 Harley Davidson FL\u003cbr\u003e\n1964 Harley Davidson FL\u003cbr\u003e\n1965 Harley Davidson FL\u003cbr\u003e\n1966 Harley Davidson FL\u003cbr\u003e\n1967 Harley Davidson FL\u003cbr\u003e\n1968 Harley Davidson FL\u003cbr\u003e\n1969 Harley Davidson FL\u003cbr\u003e\n1970 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson FL\u003cbr\u003e\n1972 Harley Davidson FL\u003cbr\u003e\n1973 Harley Davidson FL\u003cbr\u003e\n1974 Harley Davidson FL\u003cbr\u003e\n1975 Harley Davidson FL\u003cbr\u003e\n1976 Harley Davidson FL\u003cbr\u003e\n1977 Harley Davidson FL\u003cbr\u003e\n1978 Harley Davidson FL\u003cbr\u003e\n1979 Harley Davidson FL\u003cbr\u003e\n1980 Harley Davidson FL\u003cbr\u003e\n1981 Harley Davidson FL\u003cbr\u003e\n1982 Harley Davidson FL\u003cbr\u003e\n1983 Harley Davidson FL\u003cbr\u003e\n1984 Harley Davidson FL\u003cbr\u003e\n1986 Harley Davidson FXST\u003cbr\u003e\n1987 Harley Davidson FXST\u003cbr\u003e\n1988 Harley Davidson FXST\u003cbr\u003e\n1989 Harley Davidson FXST\u003cbr\u003e\n1990 Harley Davidson FXST\u003cbr\u003e\n1991 Harley Davidson FXST\u003cbr\u003e\n1992 Harley Davidson FXST\u003cbr\u003e\n1993 Harley Davidson FXST\u003cbr\u003e\n1994 Harley Davidson FXST\u003cbr\u003e\n1995 Harley Davidson FXST\u003cbr\u003e\n1996 Harley Davidson FXST\u003cbr\u003e\n1997 Harley Davidson FXST\u003cbr\u003e\n1998 Harley Davidson FXST\u003cbr\u003e\n1999 Harley Davidson FXST","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678822428759,"sku":"51-4199","price":4007.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-3525-200-xl-rigid-frame-40-degree-rake","title":"V-Twin 51-3525 200 XL Rigid Frame, 40-Degree Rake","description":"200 XL rigid frame features a 40 rake with a 3 inch stretch. Frame can be set up for 1957-1985 type Ironhead motors.\n\u003cp\u003eThe V-Twin 51-3525 200 XL Rigid Frame features a 40-degree rake and is designed for 1986–1995 Harley-Davidson XL applications. The frame accepts 1-inch neck cups, a Wide Glide fork assembly, a stock-length kickstand and pin, and mounts for a stock gas tank. It also accepts a right-side-drive transmission and uses a disc-brake configuration.\u003c\/p\u003e\u003cp\u003eThis frame includes provisions for the oil tank, battery box, kickstand, rear fender, and sissy bar mounts, though the oil tank and battery box must be ordered separately. The rear axle plate slot is 3\/4 inch wide. Spacers with 3\/4-inch flats are used with plates featuring a 9\/16-inch axle hole. The frame does not include a cross-shaft provision for mechanical brakes and requires the V-Twin 51-0389 XL Brake Shaft Tube.\u003c\/p\u003e\u003cp\u003eBuilder preparation is required. The top-mount extension must be fabricated and is not included. Additional tabs and brackets may be needed as the build progresses. V-Twin recommends pre-building and disassembling the assembly before final construction, paint, and installation. Verify engine drain-plug clearance, as the frame cross brace may require clearance to provide access. The frame is supplied as an individual unit and includes no oil tank or battery box.\u003c\/p\u003e\u003cp\u003eSuggested related components include neck cup sets, a battery carrier kit, rear axle and adjuster components, an axle spacer, axle nut kit, front top motor mount, belt and pulley components, a rear caliper and disc kit, and kickstand components. Refer to the manufacturer’s instructions for installation information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 1986–1995 Harley-Davidson XL models\u003c\/li\u003e\n\u003cli\u003eFrame Style: Rigid frame with a 40-degree rake\u003c\/li\u003e\n\u003cli\u003eNeck Compatibility: Accepts 1-inch neck cups\u003c\/li\u003e\n\u003cli\u003eFork Compatibility: Designed for a Wide Glide fork assembly\u003c\/li\u003e\n\u003cli\u003eTransmission Compatibility: Accepts a right-side-drive transmission\u003c\/li\u003e\n\u003cli\u003eBrake Configuration: Disc-brake type; does not have a cross-shaft provision for mechanical brakes\u003c\/li\u003e\n\u003cli\u003eMounting Provisions: Includes mounts for a stock gas tank and provisions for oil tank, battery box, kickstand, rear fender, and sissy bar mounts\u003c\/li\u003e\n\u003cli\u003eRear Axle Plate Slot: 3\/4 inch wide\u003c\/li\u003e\n\u003cli\u003eRequired Component: Must be used with V-Twin 51-0389 XL Brake Shaft Tube\u003c\/li\u003e\n\u003cli\u003eBuild Note: Top-mount extension must be fabricated by the builder and is not included\u003c\/li\u003e\n\u003cli\u003eAccessory Items: 51-0474 - Motor Adapter Kit, 51-0389 - XL Brake Shaft Tube, 22-0308 - XL Brake Pedal Kit Zinc Plated, 3058-10 - Rear Motor Mount and Sprocket Cover Mount Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1986 Harley Davidson XL\u003cbr\u003e\n1987 Harley Davidson XL\u003cbr\u003e\n1988 Harley Davidson XL\u003cbr\u003e\n1989 Harley Davidson XL\u003cbr\u003e\n1990 Harley Davidson XL\u003cbr\u003e\n1991 Harley Davidson XL\u003cbr\u003e\n1992 Harley Davidson XL\u003cbr\u003e\n1993 Harley Davidson XL\u003cbr\u003e\n1994 Harley Davidson XL\u003cbr\u003e\n1995 Harley Davidson XL\u003cbr\u003e\n1996 Harley Davidson XL\u003cbr\u003e\n1997 Harley Davidson XL\u003cbr\u003e\n1998 Harley Davidson XL\u003cbr\u003e\n1999 Harley Davidson XL\u003cbr\u003e\n2000 Harley Davidson XL\u003cbr\u003e\n2001 Harley Davidson XL\u003cbr\u003e\n2002 Harley Davidson XL\u003cbr\u003e\n2003 Harley Davidson XL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678824624215,"sku":"51-3525","price":2657.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"aee-6-inch-hardhead-frame-neck-raw-steel-sku-51-8603","title":"AEE 6-Inch Hardhead Frame Neck Raw Steel, SKU 51-8603","description":"Hardhead frame neck is 40 with 6 inch rise for the digger look and features a raw steel finish.\n\u003cp\u003eThe AEE 6-Inch Hardhead Frame Neck Raw Steel, SKU 51-8603, is designed for use with 1986–1995 Harley-Davidson XL models. Its down tubes have a 1-inch outer diameter for a lighter forward look, and the frame neck accepts Big Twin 1-inch bearing cups and a 1-inch neck cup set, available separately.\u003c\/p\u003e\u003cp\u003eThis frame neck must be welded in place. Use the motor installed for alignment, and use the supplied gussets as part of the frame installation. The hardhead neck does not have serial numbers. Weld inserts into the upper and lower tubes as required.\u003c\/p\u003e\u003cp\u003eThe frame does not include the mechanical cross shaft tube, which is available separately as required. This product is required to be used with the #51-0389 XL Brake Shaft Tube. Review all installation requirements before beginning assembly to ensure the frame neck and related components are properly integrated.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand and SKU: AEE 6-Inch Hardhead Frame Neck Raw Steel, SKU 51-8603\u003c\/li\u003e\n\u003cli\u003eApplication: Fits 1986–1995 Harley-Davidson XL models\u003c\/li\u003e\n\u003cli\u003eConstruction: Raw steel frame neck designed to be welded in place\u003c\/li\u003e\n\u003cli\u003eDown Tubes: 1-inch outer diameter down tubes provide a lighter forward look\u003c\/li\u003e\n\u003cli\u003eBearing Cups: Accepts Big Twin 1-inch bearing cups\u003c\/li\u003e\n\u003cli\u003eNeck Cup Set: Accepts a 1-inch neck cup set, available separately\u003c\/li\u003e\n\u003cli\u003eInstallation: Use the motor installed for alignment\u003c\/li\u003e\n\u003cli\u003eFrame Assembly: Use the gussets supplied as part of the frame\u003c\/li\u003e\n\u003cli\u003eWelding Requirements: Use weld inserts into the upper and lower tubes\u003c\/li\u003e\n\u003cli\u003eSerial Number Note: Frame hardhead neck does not have serial numbers\u003c\/li\u003e\n\u003cli\u003eRequired Component: Must be used with #51-0389 XL Brake Shaft Tube\u003c\/li\u003e\n\u003cli\u003eExcluded Component: Mechanical cross shaft tube is not included and is available separately as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1986 Harley Davidson XL\u003cbr\u003e\n1987 Harley Davidson XL\u003cbr\u003e\n1988 Harley Davidson XL\u003cbr\u003e\n1989 Harley Davidson XL\u003cbr\u003e\n1990 Harley Davidson XL\u003cbr\u003e\n1991 Harley Davidson XL\u003cbr\u003e\n1992 Harley Davidson XL\u003cbr\u003e\n1993 Harley Davidson XL\u003cbr\u003e\n1994 Harley Davidson XL\u003cbr\u003e\n1995 Harley Davidson XL\u003cbr\u003e\n1996 Harley Davidson XL\u003cbr\u003e\n1997 Harley Davidson XL\u003cbr\u003e\n1998 Harley Davidson XL\u003cbr\u003e\n1999 Harley Davidson XL\u003cbr\u003e\n2000 Harley Davidson XL\u003cbr\u003e\n2001 Harley Davidson XL\u003cbr\u003e\n2002 Harley Davidson XL\u003cbr\u003e\n2003 Harley Davidson XL","brand":"AEE","offers":[{"title":"Default Title","offer_id":44678824656983,"sku":"51-8603","price":1981.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1946-replica-knucklehead-30-degree-rake-frame","title":"V-Twin 51-1946 Replica Knucklehead 30-Degree Rake Frame","description":"Knucklehead frame is an authentic reproduction of the factory style bull neck frames  with numbered forgings  seat post junction  rear motor mount  front motor mount and rear axle plates.\n\u003cp\u003eThe V-Twin 51-1946 Replica Knucklehead 30-Degree Rake Frame is designed for 1946–1947 Harley-Davidson FL, U, and EL applications. Its 30-degree neck angle accepts offset spring forks, while the top cross member across the rear legs is brazed in the style of original frames.\u003c\/p\u003e\u003cp\u003eForged components include the neck, front and rear motor mounts, sidecar loops, and rear axle plates. The frame also includes a seat post, with seat post bushings, mechanical brake cross-shaft bushings, the correct toolbox mount, and grease fittings installed. The replica frame features hallmark numbers and marks on the seat yoke, front motor mount, sidecar loops, rear axle plates, and transmission front and rear mounts.\u003c\/p\u003e\u003cp\u003eA Manufacturer's Statement of Origin is supplied. There are no serial numbers stamped on the replica frame; V-Twin supplies a bill of sale referencing part number 51-1946. Seat post and cross-shaft bushings may require further reaming for proper fit. Mount the seat to the frame before installing the gas tanks, and place the 6320 washer between the tank and frame tab before mounting. Suggested toolbox brackets include V-Twin 31-0406 and 31-0412.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e30-degree neck angle: Accepts offset spring forks.\u003c\/li\u003e\n\u003cli\u003eForged components: Includes the neck, front and rear motor mounts, sidecar loops, and rear axle plates.\u003c\/li\u003e\n\u003cli\u003eRear cross member: Brazed across the rear legs in the style of original frames.\u003c\/li\u003e\n\u003cli\u003eSeat post: Included with seat post bushings installed.\u003c\/li\u003e\n\u003cli\u003eInstalled components: Mechanical brake cross-shaft bushings, correct toolbox mount, and grease fittings.\u003c\/li\u003e\n\u003cli\u003eHallmark details: Forged parts include hallmark numbers and marks on specified frame components.\u003c\/li\u003e\n\u003cli\u003eDocumentation: Manufacturer's Statement of Origin and a bill of sale referencing part number 51-1946 are supplied.\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 1946–1947 Harley-Davidson FL, U, and EL models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1946 Harley Davidson EL\u003cbr\u003e\n1946 Harley Davidson FL\u003cbr\u003e\n1946 Harley Davidson U\u003cbr\u003e\n1947 Harley Davidson EL\u003cbr\u003e\n1947 Harley Davidson FL\u003cbr\u003e\n1947 Harley Davidson U","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678826819671,"sku":"51-1946","price":7822.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-straight-leg-rigid-frame-51-1957","title":"V-Twin Straight Leg Rigid Frame, 51-1957","description":"Retro rigid frame straight leg original style is updated to accept flat side gas\/oil tanks. Original forged parts include: neck  side car mounts and rear axle area. For all Big Twin engines with 4″ 5 or 6 speed transmission.\n\u003cp\u003eThe V-Twin Straight Leg Rigid Frame, SKU 51-1957, is designed for Shovelhead, Evolution, and TC-88 engines and features a taller engine compartment to accommodate Evolution and TC-88 through 110 motors. It accepts a tin inner primary and rigid-mount five- and six-speed transmissions with aluminum inner and outer primaries. The frame has a 2-inch extended neck over stock with a 30-degree rake and includes a toolbox mount.\u003c\/p\u003e\u003cp\u003eThis frame accepts Knucklehead or Flathead engines when used with a mount spacer, as well as disc brakes and 1987-up style rear calipers. It is configured for a 1986-1989 Softail gas tank, a 230 rear tire with chain drive, or a 200 rear tire with belt or chain drive, and a 3\/4-inch rigid rear axle. It accepts 140-200 rear tires and will not accept a stock seat post. The castings feature detailed finishing at all points and are not Hallmark-type castings.\u003c\/p\u003e\u003cp\u003eTech notes for SKU 51-1957 specify the required offset plates and sprockets for 230 and 200 rear-tire applications. A #42-0617 tin inner primary is required with Shovelhead, Evolution, or Twin Cam engines. A #51-0625 rear frame mount adapter plate is required with a TC-88 engine, while a #31-0475 front engine mount spacer is used for 1936-1947 Knucklehead or Flathead engines in 1948-up frames. Seat post and cross-shaft bushings may require additional reaming, and some holes may require slight reaming or filing during assembly. The raw steel transmission mount plate and axle are not included.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine Compatibility: Designed for Shovelhead, Evolution, and TC-88 engines; the taller engine compartment accommodates Evolution and TC-88 through 110 motors.\u003c\/li\u003e\n\u003cli\u003eTransmission Configuration: Accepts rigid-mount five- and six-speed transmissions with aluminum inner and outer primaries.\u003c\/li\u003e\n\u003cli\u003eNeck Design: Features a neck extended 2 inches over stock with a 30-degree rake.\u003c\/li\u003e\n\u003cli\u003eRear Tire Applications: Accepts 140-200 rear tires and is configured for a 230 rear tire with chain drive or a 200 rear tire with belt or chain drive.\u003c\/li\u003e\n\u003cli\u003eBrake Compatibility: Accepts disc brakes and 1987-up style rear calipers.\u003c\/li\u003e\n\u003cli\u003eGas Tank Compatibility: Designed for a 1986-1989 Softail gas tank.\u003c\/li\u003e\n\u003cli\u003eMounting Details: Includes a toolbox mount; a stock seat post is not accepted.\u003c\/li\u003e\n\u003cli\u003eAssembly Notes: Seat post and cross-shaft bushings may require further reaming, and some holes may require slight reaming or filing for assembly.\u003c\/li\u003e\n\u003cli\u003eExclusions: Raw steel transmission mount plate and axle are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL\u003cbr\u003e\n1958 Harley Davidson FL\u003cbr\u003e\n1959 Harley Davidson FL\u003cbr\u003e\n1960 Harley Davidson FL\u003cbr\u003e\n1961 Harley Davidson FL\u003cbr\u003e\n1962 Harley Davidson FL\u003cbr\u003e\n1963 Harley Davidson FL\u003cbr\u003e\n1964 Harley Davidson FL\u003cbr\u003e\n1965 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson Fx\u003cbr\u003e\n1972 Harley Davidson Fx\u003cbr\u003e\n1973 Harley Davidson Fx\u003cbr\u003e\n1974 Harley Davidson Fx\u003cbr\u003e\n1975 Harley Davidson Fx\u003cbr\u003e\n1976 Harley Davidson Fx\u003cbr\u003e\n1977 Harley Davidson Fx\u003cbr\u003e\n1978 Harley Davidson Fx\u003cbr\u003e\n1979 Harley Davidson Fx\u003cbr\u003e\n1980 Harley Davidson Fx\u003cbr\u003e\n1981 Harley Davidson Fx\u003cbr\u003e\n1982 Harley Davidson Fx\u003cbr\u003e\n1983 Harley Davidson Fx\u003cbr\u003e\n1984 Harley Davidson Fx\u003cbr\u003e\n1985 Harley Davidson Fx\u003cbr\u003e\n1986 Harley Davidson Fx\u003cbr\u003e\n1987 Harley Davidson Fx\u003cbr\u003e\n1988 Harley Davidson Fx\u003cbr\u003e\n1989 Harley Davidson Fx\u003cbr\u003e\n1990 Harley Davidson Fx\u003cbr\u003e\n1991 Harley Davidson Fx\u003cbr\u003e\n1992 Harley Davidson Fx\u003cbr\u003e\n1993 Harley Davidson Fx\u003cbr\u003e\n1994 Harley Davidson Fx\u003cbr\u003e\n1995 Harley Davidson Fx\u003cbr\u003e\n1996 Harley Davidson Fx\u003cbr\u003e\n1997 Harley Davidson Fx\u003cbr\u003e\n1998 Harley Davidson Fx\u003cbr\u003e\n1999 Harley Davidson Fx","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44678826917975,"sku":"51-1957","price":3835.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1801-retromod-rigid-frame-1","title":"V-Twin 51-1801 Retromod Rigid Frame","description":"Raw retromod rigid frame with a 1-1\/2 inch outer diameter backbone  a 1-1\/4 inch outer diameter cradle  and tail section.\n\u003cp\u003eThe V-Twin 51-1801 Retromod Rigid Frame is designed for use with Panhead, Shovelhead, and Big Twin Evolution engines. It features a 30-degree rake and zero downtube stretch, with capacity for stroker engines up to 0.200 inch taller. The frame can accommodate either 4-speed or 5-speed transmissions.\u003c\/p\u003e\u003cp\u003eThis raw frame is intended for experienced bike builders, and customization, slight modifications, or minor imperfections should be expected. A Manufacturer's Statement of Origin (MSO) is included. The 4-speed or 5-speed transmission and mounting plate, chain final drive, late 1987-1999 Softail-style rear brake assembly, Evolution-style oil tank and mounts, fork cups and bearings, 1984-1985 Softail rear axle, 1987-1999 Softail axle adjusters, and 1986-1999 Softail axle spacers require separate purchase.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine Compatibility: Designed for Panhead, Shovelhead, and Big Twin Evolution engines.\u003c\/li\u003e\n\u003cli\u003eRake: 30-degree rake.\u003c\/li\u003e\n\u003cli\u003eDowntube Stretch: Zero downtube stretch.\u003c\/li\u003e\n\u003cli\u003eStroker Clearance: Accommodates stroker engines up to 0.200 inch taller.\u003c\/li\u003e\n\u003cli\u003eTransmission Compatibility: Accepts either 4-speed or 5-speed transmissions.\u003c\/li\u003e\n\u003cli\u003eBuilder Requirements: Raw frame intended for an experienced bike builder; customization, modifications, and slight imperfections are to be expected.\u003c\/li\u003e\n\u003cli\u003eDocumentation: Includes a Manufacturer's Statement of Origin (MSO).\u003c\/li\u003e\n\u003cli\u003eRequired Separate Components: Transmission and mounting plate, chain final drive, late 1987-1999 Softail-style rear brake assembly, Evolution-style oil tank and mounts, fork cups and bearings, 1984-1985 Softail rear axle, 1987-1999 Softail axle adjusters, and 1986-1999 Softail axle spacers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44679137263703,"sku":"51-1801","price":3284.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-1801a.jpg?v=1794852307"},{"product_id":"v-twin-51-1566-1948-retro-wishbone-type-frame-1","title":"V-Twin 51-1566 1948 Retro Wishbone Type Frame","description":"Raw 1948 retro wishbone type frame with horn mount tabs and tool box mount for Panhead  Knucklehead  Shovelhead and UL engines.\n\u003cp\u003eThe V-Twin 51-1566 1948 Retro Wishbone Type Frame is a raw frame designed for custom motorcycle applications. It features horn mount tabs and a toolbox mount, providing mounting provisions for the related components.\u003c\/p\u003e\u003cp\u003eThis wishbone-style frame is stated to fit Panhead, Knucklehead, Shovelhead, and UL engines. The product data also lists fitment for select Harley-Davidson FL models from 1949 through 1983, including model years 1951, 1952, 1954, 1960, 1965, 1968, 1972, 1979, and 1983. Review the specific motorcycle application before ordering.\u003c\/p\u003e\u003cp\u003eWith its raw finish and retro 1948 design, the V-Twin 51-1566 frame can serve as a foundation for a restoration or custom build. The frame is sold as an individual unit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesign: 1948 retro wishbone type frame\u003c\/li\u003e\n\u003cli\u003eFinish: Raw\u003c\/li\u003e\n\u003cli\u003eMounting Provisions: Horn mount tabs and toolbox mount\u003c\/li\u003e\n\u003cli\u003eEngine Fitment: Panhead, Knucklehead, Shovelhead, and UL engines\u003c\/li\u003e\n\u003cli\u003eListed Motorcycle Fitment: Select Harley-Davidson FL models from 1949 through 1983\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1941 Harley Davidson FL\u003cbr\u003e\n1942 Harley Davidson FL\u003cbr\u003e\n1943 Harley Davidson FL\u003cbr\u003e\n1944 Harley Davidson FL\u003cbr\u003e\n1945 Harley Davidson FL\u003cbr\u003e\n1946 Harley Davidson FL\u003cbr\u003e\n1947 Harley Davidson FL\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL\u003cbr\u003e\n1958 Harley Davidson FL\u003cbr\u003e\n1959 Harley Davidson FL\u003cbr\u003e\n1960 Harley Davidson FL\u003cbr\u003e\n1961 Harley Davidson FL\u003cbr\u003e\n1962 Harley Davidson FL\u003cbr\u003e\n1963 Harley Davidson FL\u003cbr\u003e\n1964 Harley Davidson FL\u003cbr\u003e\n1965 Harley Davidson FL\u003cbr\u003e\n1966 Harley Davidson FL\u003cbr\u003e\n1967 Harley Davidson FL\u003cbr\u003e\n1968 Harley Davidson FL\u003cbr\u003e\n1969 Harley Davidson FL\u003cbr\u003e\n1970 Harley Davidson FL\u003cbr\u003e\n1971 Harley Davidson FL\u003cbr\u003e\n1972 Harley Davidson FL\u003cbr\u003e\n1973 Harley Davidson FL\u003cbr\u003e\n1974 Harley Davidson FL\u003cbr\u003e\n1975 Harley Davidson FL\u003cbr\u003e\n1976 Harley Davidson FL\u003cbr\u003e\n1977 Harley Davidson FL\u003cbr\u003e\n1978 Harley Davidson FL\u003cbr\u003e\n1979 Harley Davidson FL\u003cbr\u003e\n1980 Harley Davidson FL\u003cbr\u003e\n1981 Harley Davidson FL\u003cbr\u003e\n1982 Harley Davidson FL\u003cbr\u003e\n1983 Harley Davidson FL\u003cbr\u003e\n1984 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44679305592919,"sku":"51-1566","price":5460.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"v-twin-51-1080-replica-hm-wishbone-frame-for-1948-harley-davidson-fl","title":"V-Twin 51-1080 Replica HM Wishbone Frame for 1948 Harley-Davidson FL","description":"Replica  inchHM inch wishbone frame features full  inchhallmarks inch on forgings. Does not include indents or horn mounts on wishbone front legs.\n\u003cp\u003eThe V-Twin 51-1080 Replica HM Wishbone Frame is designed for 1948 Harley-Davidson FL applications. This wishbone frame features a 30-degree rake, and the neck forging is supplied separately for builders to affix.\u003c\/p\u003e\u003cp\u003eHallmark details are present in the forged components, including the axle plates, sidecar loops, front motor mount, rear motor mount, and seat yoke. The replica frame does not have serial numbers stamped on it. V-Twin supplies a Bill of Sale referencing part number 51-1080.\u003c\/p\u003e\u003cp\u003eThis frame is supplied as an individual component. Accessory items include additional replica frame options listed below.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: V-Twin\u003c\/li\u003e\n\u003cli\u003ePart Number: 51-1080\u003c\/li\u003e\n\u003cli\u003eFitment: 1948 Harley-Davidson FL\u003c\/li\u003e\n\u003cli\u003eFrame Style: Replica wishbone frame\u003c\/li\u003e\n\u003cli\u003eRake: 30 degrees\u003c\/li\u003e\n\u003cli\u003eNeck Forging: Supplied separately for builders to affix\u003c\/li\u003e\n\u003cli\u003eForged Component Details: Axle plates, sidecar loops, front motor mount, rear motor mount, and seat yoke\u003c\/li\u003e\n\u003cli\u003eIdentification: No serial numbers are stamped on the replica frame\u003c\/li\u003e\n\u003cli\u003eDocumentation: Bill of Sale supplied by V-Twin referencing part number 51-1080\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44679646871639,"sku":"51-1080","price":7553.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-1080a.jpg?v=1794859887"},{"product_id":"v-twin-51-1077-replica-hm-wishbone-rigid-frame","title":"V-Twin 51-1077 Replica HM Wishbone Rigid Frame","description":"Replica  inchHM inch wishbone frame features full  inchhallmarks inch on forgings. Frame is an authentic reproduction of Replica Wishbone frame is an reproduction of a 1954 Panhead frame  but will also fit 1948-1957 Rigid.\n\u003cp\u003eThe V-Twin 51-1077 Replica HM Wishbone Rigid Frame is designed for 1948–1957 Harley-Davidson FL models. This replica frame is supplied with a Bill of Sale referencing part number 51-1077. No serial numbers are stamped on the replica frame.\u003c\/p\u003e\u003cp\u003eHallmark details are present in the forged components, including the axle plates, sidecar loops, front motor mount, rear motor mount, and seat yoke. The frame is manufactured in Taiwan and is supplied as one unit.\u003c\/p\u003e\u003cp\u003eBefore installation, verify the frame and application requirements for your specific motorcycle. The V-Twin 51-1077 frame fits 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, and 1957 Harley-Davidson FL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: V-Twin\u003c\/li\u003e\n\u003cli\u003ePart Number: 51-1077\u003c\/li\u003e\n\u003cli\u003eDesign: Replica HM wishbone rigid frame\u003c\/li\u003e\n\u003cli\u003eFitment: 1948–1957 Harley-Davidson FL models\u003c\/li\u003e\n\u003cli\u003eDocumentation: Supplied with a Bill of Sale referencing the part number\u003c\/li\u003e\n\u003cli\u003eSerial Numbers: No serial numbers are stamped on the replica frame\u003c\/li\u003e\n\u003cli\u003eHallmark Details: Forged components include the axle plates, sidecar loops, front motor mount, rear motor mount, and seat yoke\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Taiwan\u003c\/li\u003e\n\u003cli\u003eUnit of Measure: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1948 Harley Davidson FL\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL\u003cbr\u003e\n1953 Harley Davidson FL\u003cbr\u003e\n1954 Harley Davidson FL\u003cbr\u003e\n1955 Harley Davidson FL\u003cbr\u003e\n1956 Harley Davidson FL\u003cbr\u003e\n1957 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44679698481239,"sku":"51-1077","price":7129.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-1077a.jpg?v=1794859947"},{"product_id":"v-twin-51-1076-replica-hm-wishbone-rigid-frame","title":"V-Twin 51-1076 Replica HM Wishbone Rigid Frame","description":"Replica  inchHM inch wishbone frame features full  inchhallmarks inch on forgings. Includes horn mount tabs on wishbone tubes.\n\u003cp\u003eThe V-Twin 51-1076 Replica HM Wishbone Rigid Frame is a kit featuring forged axle plates, sidecar loops, a front motor mount, a rear motor mount, a seat yoke, rear forging engine and wishbone sidecar components. The neck does not have hallmarks. A V-Twin 51-0068 Rigid Front Frame Forging Hallmark Plate may be affixed if desired.\u003c\/p\u003e\u003cp\u003eDesigned for use with select 1949–1952 Harley-Davidson FL applications, this V-Twin 51-1076 frame kit is suggested for use with the V-Twin 51-0068 Rigid Front Frame Forging Hallmark Plate. Suggested related items include the 49-0181 Black Replica Seat Post Assembly. Refer to the manufacturer's instructions for installation information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand and SKU: V-Twin 51-1076\u003c\/li\u003e\n\u003cli\u003eFrame Type: Replica HM wishbone rigid frame\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes axle plates, sidecar loops, front motor mount, rear motor mount, seat yoke, rear forging engine and wishbone sidecar components\u003c\/li\u003e\n\u003cli\u003eNeck: Does not have hallmarks\u003c\/li\u003e\n\u003cli\u003eSuggested Plate: V-Twin 51-0068 Rigid Front Frame Forging Hallmark Plate\u003c\/li\u003e\n\u003cli\u003eFitment: 1949–1952 Harley-Davidson FL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1949 Harley Davidson FL\u003cbr\u003e\n1950 Harley Davidson FL\u003cbr\u003e\n1951 Harley Davidson FL\u003cbr\u003e\n1952 Harley Davidson FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44679724335191,"sku":"51-1076","price":7553.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-1076a.jpg?v=1794859970"},{"product_id":"v-twin-51-1041-replica-knucklehead-28-rake-frame-for-1938-1940-harley-davidson-el-1","title":"V-Twin 51-1041 Replica Knucklehead 28 Rake Frame for 1938-1940 Harley-Davidson EL","description":"Replica Knucklehead frame is a reproduction of the factory style frame.\n\u003cp\u003eThe V-Twin 51-1041 Replica Knucklehead 28 Rake Frame is designed for 1938, 1939, and 1940 Harley-Davidson EL applications. The frame includes a seat post, brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate pre-installed to support safer shipping.\u003c\/p\u003e\u003cp\u003eCross shaft bushings, the correct toolbox mount, and grease fittings are installed. The round toolbox pads are positioned for mounting a rectangular toolbox. Forged components include the neck, front and rear motor mounts, seat yoke, sidecar loops, and rear axle plates.\u003c\/p\u003e\u003cp\u003eThe seat post and cross shaft bushings may require further reaming for proper fit. In some instances, holes may need to be slightly reamed or filed to assemble parts onto the frame. This frame is not accepted for return for these fitment-related requirements. The Knucklehead frame requires purchase of clamp-on coil bracket kit 49-0099. In lieu of a serial number stamped on the replica frame, V-Twin supplies a Bill of Sale referencing part number 51-1041.\u003c\/p\u003e\u003cp\u003eSuggested items include rear frame engine mount and front transmission mount 51-0522 and footboard tabs 27-0664. Accessory items include a rectangular black toolbox, replica engine skid plate, and rectangle raw toolbox. UPS may consider this part oversized for shipment compared with its actual weight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 1938, 1939, and 1940 Harley-Davidson EL models\u003c\/li\u003e\n\u003cli\u003ePre-Installed Components: Includes seat post, brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate\u003c\/li\u003e\n\u003cli\u003eInstalled Hardware: Includes cross shaft bushings, toolbox mount, and grease fittings\u003c\/li\u003e\n\u003cli\u003eToolbox Mounting: Round toolbox pads are positioned for mounting a rectangular toolbox\u003c\/li\u003e\n\u003cli\u003eForged Components: Includes neck, front and rear motor mounts, seat yoke, sidecar loops, and rear axle plates\u003c\/li\u003e\n\u003cli\u003eFitment Note: Seat post and cross shaft bushings may require further reaming for proper fit\u003c\/li\u003e\n\u003cli\u003eAssembly Note: Holes may require slight reaming or filing during assembly\u003c\/li\u003e\n\u003cli\u003eCoil Bracket Requirement: Knucklehead frame requires clamp-on coil bracket kit 49-0099\u003c\/li\u003e\n\u003cli\u003eDocumentation: Bill of Sale references part number 51-1041 in lieu of a stamped serial number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1938 Harley Davidson EL\u003cbr\u003e\n1939 Harley Davidson EL\u003cbr\u003e\n1940 Harley Davidson EL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44680038023255,"sku":"51-1041","price":7137.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-1041a_7b7b184d-ccfb-4a4b-8d54-fd04f3b46019.jpg?v=1794864013"},{"product_id":"v-twin-51-1040-replica-1936-knucklehead-frame-1","title":"V-Twin 51-1040 Replica 1936 Knucklehead Frame","description":"Replica frame is an authentic reproduction of the factory style with 13 brazed joints. The 28 rake neck angle will accept inline spring forks. Features 1 inch down tubes with weld on side car mounts specific to the 1936 model only!\n\u003cp\u003eThe V-Twin 51-1040 Replica 1936 Knucklehead Frame accepts a Knucklehead or Big Twin Flathead engine with a 3- or 4-speed transmission. It is listed for fitment with the 1936 Harley Davidson EL and features new production construction with 13 brazed joints designed to replicate the original frame appearance.\u003c\/p\u003e\u003cp\u003eThe frame includes a seat post, brake cross shaft, rear axle assembly, transmission plate and motor alignment plate to support safer shipping. Cross shaft bushings, a tool box mount and grease fittings are installed. Forged components include the neck, front and rear engine mounts, yoke and rear axle plates. Brazed components include the top motor mount, front tank mount, sidecar loops, footboard mount, transmission strap, center post strap, rear fender cross bar saddles, oil tank mount and upper rear frame bars at the tank tube.\u003c\/p\u003e\u003cp\u003eFor the original rear axle plate appearance, the rear brake slot on the left side is closed and must be cut out at the front as desired by the builder. Seat post and cross shaft bushings may require additional reaming for proper fit, and some holes may need slight reaming or filing during assembly. The horizontal frame cross bar uses 7\/8-inch outside-diameter tubing. A clamp-on coil bracket kit, part number 49-0099, is required for a Knucklehead frame. No serial numbers are stamped on the replica frame; V-Twin supplies a bill of sale referencing part number 51-1040.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: Fits 1936 Harley Davidson EL.\u003c\/li\u003e\n\u003cli\u003eEngine and Transmission Compatibility: Accepts a Knucklehead or Big Twin Flathead engine with a 3- or 4-speed transmission.\u003c\/li\u003e\n\u003cli\u003eConstruction: New production frame with 13 brazed joints modeled after the original.\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Includes seat post, brake cross shaft, rear axle assembly, transmission plate and motor alignment plate.\u003c\/li\u003e\n\u003cli\u003eInstalled Components: Cross shaft bushings, tool box mount and grease fittings are installed.\u003c\/li\u003e\n\u003cli\u003eForged Parts: Neck, front and rear engine mounts, yoke and rear axle plates are forged.\u003c\/li\u003e\n\u003cli\u003eBrazed Parts: Top motor mount, front tank mount, sidecar loops, footboard mount, transmission strap, center post strap, rear fender cross bar saddles, oil tank mount and upper rear frame bars at the tank tube.\u003c\/li\u003e\n\u003cli\u003eAssembly Notes: Seat post and cross shaft bushings may require further reaming, and some holes may require slight reaming or filing for assembly.\u003c\/li\u003e\n\u003cli\u003eCoil Bracket Requirement: Knucklehead frame requires clamp-on coil bracket kit 49-0099.\u003c\/li\u003e\n\u003cli\u003eRear Axle Plate Detail: The left rear brake slot is closed and may be cut out at the front by the builder.\u003c\/li\u003e\n\u003cli\u003eFrame Detail: Horizontal frame cross bar features 7\/8-inch outside-diameter tubing.\u003c\/li\u003e\n\u003cli\u003eDocumentation: No serial numbers are stamped on the replica frame; V-Twin supplies a bill of sale referencing part number 51-1040.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1936 Harley Davidson EL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44680041824343,"sku":"51-1040","price":8575.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-1040a_9ee31a49-c273-4394-9659-ceae21179fee.jpg?v=1794864026"},{"product_id":"v-twin-d-d-xl-rigid-frame-raw-51-0799","title":"V-Twin D+D XL Rigid Frame Raw 51-0799","description":"D+D rigid frame is a basic starter frame featuring a 1-1\/4 inch steel tubing with a 1-1\/2 inch backbone  30 rake and 0 stretch for XL models with disc brakes.\n\u003cp\u003eThe V-Twin D+D XL Rigid Frame Raw, part number 51-0799, is designed for experienced builders creating a custom XL-based motorcycle project. The frame can be set up for 1957–1985 type Ironhead or Evolution engines and may be modified for mechanical brakes. It accepts the XL rigid oil tank and oil tank battery mount kit, while additional build-specific modifications may be required as the project progresses.\u003c\/p\u003e\u003cp\u003eThis frame requires a custom 3\/4-inch rear axle and mid-control mounts. Wheel adjuster blocks accept 3\/4-24 screws, and spacers with 3\/4-inch flats may be used to fit the axle plates. The frame does not include forward-control mounts or a cross-shaft provision for mechanical brakes. Builders should plan for the sissy bar, oil tank, battery, kickstand, and rear fender mounts, which are available separately. The fender cross bars have a 1-inch outside diameter.\u003c\/p\u003e\u003cp\u003ePre-build the frame before disassembly and final assembly to confirm that all mounts and modifications are completed before painting. Suggested components include the #40-9008 XL Round Oil Tank Chrome, #40-9009 XL Round Oil Tank Raw, #31-1892 Oil Tank Mount Bracket, #44-0763 9\/16-inch Rear Axle Adapter Spacer Set, and #51-0515 Kickstand Frame Mount Universal. The #51-0389 XL Brake Shaft Tube is required. This frame fits 1986–1995 Harley-Davidson XL applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRaw rigid frame: Designed for experienced builders developing a custom XL-based motorcycle.\u003c\/li\u003e\n\u003cli\u003eEngine setup: Can be set up for 1957–1985 type Ironhead or Evolution engines.\u003c\/li\u003e\n\u003cli\u003eOil tank compatibility: Accepts the XL rigid oil tank and oil tank battery mount kit.\u003c\/li\u003e\n\u003cli\u003eRear axle requirement: Requires a custom 3\/4-inch rear axle and mid-control mounts.\u003c\/li\u003e\n\u003cli\u003eWheel adjuster blocks: Accept 3\/4-24 screws.\u003c\/li\u003e\n\u003cli\u003eBrake provisions: Does not include forward-control mounts or a cross-shaft provision for mechanical brakes; the frame may be modified for mechanical brakes.\u003c\/li\u003e\n\u003cli\u003eBuild requirements: Additional weld mounts, tabs, brackets, and rear fender mounting provisions may be required.\u003c\/li\u003e\n\u003cli\u003eFender cross bars: 1-inch outside diameter.\u003c\/li\u003e\n\u003cli\u003eSuggested components: #40-9008 XL Round Oil Tank Chrome, #40-9009 XL Round Oil Tank Raw, #31-1892 Oil Tank Mount Bracket, #44-0763 9\/16-inch Rear Axle Adapter Spacer Set, and #51-0515 Kickstand Frame Mount Universal.\u003c\/li\u003e\n\u003cli\u003eRequired component: #51-0389 XL Brake Shaft Tube.\u003c\/li\u003e\n\u003cli\u003eFitment: 1986–1995 Harley-Davidson XL applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\n1986 Harley Davidson XL\u003cbr\u003e\n1987 Harley Davidson XL\u003cbr\u003e\n1988 Harley Davidson XL\u003cbr\u003e\n1989 Harley Davidson XL\u003cbr\u003e\n1990 Harley Davidson XL\u003cbr\u003e\n1991 Harley Davidson XL\u003cbr\u003e\n1992 Harley Davidson XL\u003cbr\u003e\n1993 Harley Davidson XL\u003cbr\u003e\n1994 Harley Davidson XL\u003cbr\u003e\n1995 Harley Davidson XL\u003cbr\u003e\n1996 Harley Davidson XL\u003cbr\u003e\n1997 Harley Davidson XL\u003cbr\u003e\n1998 Harley Davidson XL\u003cbr\u003e\n1999 Harley Davidson XL\u003cbr\u003e\n2000 Harley Davidson XL\u003cbr\u003e\n2001 Harley Davidson XL\u003cbr\u003e\n2002 Harley Davidson XL\u003cbr\u003e\n2003 Harley Davidson XL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44680282243159,"sku":"51-0799","price":2441.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/2276\/2583\/files\/51-0799a.jpg?v=1794868983"}],"url":"https:\/\/valleyspeed.net\/collections\/rigid.oembed","provider":"The Speed Shop Canada","version":"1.0","type":"link"}